Hallo Experten!
Kurze Einleitung: ich sauge ab und zu in Mediatheken und YT Videos, packe sie auf einen Stick, um sie mit meinem alten Mütterchen via Samsung-TV zu schauen.
Habe aber immer wieder das Problem, dass der ca. 10 Jahre alte Samsung einige mp4-Dateien abspielt, andere aber nicht. Hinwies bei Problemen: "Der Codec wird nicht unterstützt"
Manchmal wandele ich mit Handbrake um, dann klappt es. Aktuell lassen sich 4 Videos nicht abspielen, obwohl ich mit Handbrake aber auch mit XMedia Recode versucht habe die Dateien abspielbar zu wandeln. Bei XMedia hatte ich das Samsung-TV-Profil ausgewählt, trotzdem nicht abspielbar.
Ich kenne mich nicht mit dem Thema Codes aus, habe bisher immer darauf geachtet, dass der h264-Code aktiv ist. Aber was hier nun das Problem ist, kann ich nicht erkennen.
Anhand eines Beispiels zeige ich euch die Video-Infos von MediaInfo
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile :
[email protected]
Format settings : CABAC / 2 Ref Frames
Format settings, CABAC : Yes
Format settings, Reference : 2 frames
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 1 h 27 min
Bit rate : 1 500 kb/s
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 50.000 FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.014
Stream size : 942 MiB (92%)
Writing library : x264 core 160 r3000
Encoding settings : cabac=1 / ref=2 / deblock=1:0:0 / analyse=0x1:0x131 / me=hex / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=0 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=0 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=18 / lookahead_threads=3 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=0 / b_adapt=1 / b_bias=0 / direct=0 / weightb=1 / open_gop=0 / weightp=2 / keyint=500 / keyint_min=50 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=abr / mbtree=1 / bitrate=1500 / ratetol=1.0 / qcomp=0.60 / qpmin=10 / qpmax=69 / qpstep=4 / vbv_maxrate=2400 / vbv_bufsize=24000 / nal_hrd=none / filler=0 / ip_ratio=1.40 / aq=3:1.00
Encoded date : UTC 2023-01-15 15:46:49
Tagged date : UTC 2023-01-15 15:46:49
Color range : Limited
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709
Codec configuration box : avcC
Was alles unter Encoding settings aufgeführt wird, finde ich schon ungewöhnlich, kann mich aber natürlich täuschen.
Weiß jemand Rat?
Freue mich über eure Tipps und Hinweise.