Hilfe beim treiber einbinden
Hi,
wie oben beschrieb will ich treiber in meine xp installatipons cd einbinden nur weiss ich nich welche treiber ich installieren soll...
wenn euch das was bringt ich hab schoin probiert xp "normal" zu installieren da kam so bei den sata treibern kurz danach bluescreen mit der fehlermeldung
windows wurde heruntergefahren um schäden zu vermiden oda so
hier der Fehlercode
***stop: 0x0000007E, 0xC0000005, 0xF748E0BF, 0xF78DA208, 0xF78D9F08
*** pci.sys - Address F7487000, DateStamb 3b7d855c
ich habe auch schon gegoogelt und bin soweit das ich weiss das ich mit N-lite irgendwie irgendwelche treiber installieren muss...
Hier die daten meines PC's
Windows Vista Home Premium
Mainboard:
Property Value
Manufacturer PEGATRON CORPORATION
Model Benicia
Version 1.01
Serial Number MS1C85R51508919
North Bridge Intel P35/G33/G31 Revision A2
South Bridge Intel 82801IR (ICH9R) Revision A2
CPU Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz
Cpu Socket Socket 775 LGA
System Slots 4 PCI
Memory Summary
Maximum Capacity 8192 MBytes
Memory Slots 4
Error Correction None
Warning! Accuracy of DMI data cannot be guaranteed
CPU
Property Value
Number of CPU(s) One Physical Processor / 4 Cores / 4 Logical Processors / 64 bits
CPU Full Name Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz
CPU Name Intel Core 2 Quad Q9400
CPU Code Name Yorkfield
Platform Name Socket 775 LGA
Revision R0
Technology 45 nm
Instructions MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, ET64, XD, VMX, SMX, EST
Original Clock 2666 MHz
Original System Clock 333 MHz
Original Multiplier 8.0
CPU Clock 2669 MHz
System Clock 333.3 MHz
FSB 1333.3 MHz
Core 0 Speed 2000.0 MHz
Core 0 Multiplier 6.0
Core 1 Speed 2000.0 MHz
Core 1 Multiplier 6.0
Core 2 Speed 2000.0 MHz
Core 2 Multiplier 6.0
Core 3 Speed 2000.0 MHz
Core 3 Multiplier 6.0
L1 Data Cache 4 x 32 KBytes
L1 Instructions Cache 4 x 32 KBytes
L2 Cache 2 x 3072 KBytes
BIOS
Property Value
BIOS Vendor American Megatrends Inc.
BIOS Version 5.30
BIOS Date 09/05/2008
BIOS Size 1024 KB
BIOS Starting Segment F000h
DMI Version 2.5
Characteristics - supports ISA
- supports PCI
- supports Plug-and-Play
- supports APM
- upgradeable (Flash) BIOS
- allows BIOS shadowing
- ESCD support is available
- supports booting from CD-ROM
- supports selectable boot
- BIOS ROM is socketed
- supports Enhanced Disk Drive specification
- supports INT 13 5.25-inch/1.2M floppy services
- supports INT 13 3.5-inch/720K floppy services
- supports INT 13 3.5-inch/2.88M floppy services
- supports INT 05 print-screen
- supports INT 09 and 8042 keyboard services
- supports INT 14 serial services
- supports INT 17 printer services
- supports INT 10 CGA/Mono video services
- supports ACPI
- supports legacy USB
- supports booting from LS-120
- supports booting from ATAPI ZIP drive
- BIOS Boot Specification supported
- Enable Targeted Content Distribution
so meine Frage is welch Treiber benötige ich(was soll ich machen)
PS: Falls was in den Angaben fehlt bitte sagen
|
Linear-Darstellung
