[rdwnx]

This is my first tool, LogSro.
It's used to Login into any Sro server when it have free slots.

Thread Contents :
- LogSro > a full detailed guide for using the program
- Bugs > Bugs found in the current verions of LogSro
- Links > Three mirrors for Downloading
- Change Log > recent versions with their new features/updates
- F.A.Q. > Most repeated questions in my thread answered, mostly, by me

LogSro

v2.1

Guide:
(Skip the red parts for a quick guide)

1- Download LogSro package from the links down below.

The package must contain LogSro v2.0, Resources folder and the Serverlist.

2- Now, launch LogSro v2.0 which will automatically launchs the Serverlist and also waits for the serverlist to get connected. (to display the servers on the list)

LogSro is now updated in v2.0 to automatically launches the serverlist when it's launched. You just have to make sure that the server list says in the same folder (directory) as LogSro.exe.

4- Wait until the serverlist displays the servers (until it says "Stand By..." at the bottom of LogSro). Then, Choose your serer name and the minimum number of free slot that you wish to wait for before trying to login. (the higher number you choose, the better the chances are to get in that server). Don't press "Start", yet!

Sometimes, the serverlist needs time to get connected and display the servers. Well, LogSro will remain like lagging until the serverlist get connected (You will notice that LogSro is saying "Waiting for Sro Server List..." at the bottom during that period.

You will notice that there is "Server info" in LogSro which shows the same as in the serverlist except for only the choosen server. Well, this is not a new serverlist, it's just reading off the numbers from rumata's serverlist. I've made this because the serverlist will be flashing too much during refreshing it to login.

5- Launch Silkroad and then fill in your ID, Pass and the Captcha (image code) yourself. After filling the Captcha,do not press "Confirm".

You may use any Loader or/and bot that you wish. It's ok as long as they do not change the name of "SRO_Client" window while trying to login

6- Finally, "Alt+Tab" to LogSro and then press "Start". You can do other stuffs if you want as LogSro will continue it's job in the background.

You will notice that LogSro will wait for 1.5 seconds after the first refresh. Well, that's important for if LogSro fails in the first try or the info in the serverlist got changed during the last few seconds. Without this 1.5 seconds, LogSro will start on the last reading it gots from the previous try.

Anyway, what happens now is that LogSro will keep refreshing the servelist until the available free spots in the chosen server is equal to or more than the chosen "Min Free Slots" number. Then, LogSro will firstly hit confirm in sro then switch to sro window.

Thanks for reading the guide and using LogSro

Extra Features

Auto-Updating LogSro "Server Name" list

This could be my final version for LogSro thanx to this feature. LogSro will now automatically updates the "Server Name" list to exactly match the one in the serverlist. The order of the names will always be alphapitaclly (either from A->Z or Z->A).

* This occurs when the serverlist get connected and displays the names.

Auto-Launching the serverlist

Just Make sure that the serverlist stays in same folder (directory) as LogSro v2.0.exe. LogSro will now launch the serverlist when Logsro is launched or trying to "Start" Logsro and the serverlist is not launched.

The second situation might happen if the serverlist got crashed from excessive refreshing. If that happens, then just press the "Start" button in Logsro and it will launch the serverlist again and then begin refreshing.

Auto-Save/load Settings

This will automatically save and loads the "Server Name" and "Min Free Slots" for you in the file setting.ini (no need for save button now)

Records

This where "Tries", "Time (min)" and "Ref/s (Refreshs per second)" is calculated for all tries. It's just there for fun ^^. They get reseted if you close LogSro. Here is how they get calculated if you are interested:

Tries:

This is simply shows how many successful tries you've done with LogSro. What I mean by successful is until LogSro spots the required free spots No. and switchs to Sro window to confirm.

Time (min):

This shows the time taken (in minutes) for all succesful tries.

* If you see "1.50 min" there, it does not mean 1 minute and 50 seconds. That actually means 1 minute and 30 seconds. You see, "0.50" of a minutes is 30 seconds. i just wanted to say that so you don't get shocked when you see something like "1.75 min" there

Ref/s (Refreshs per seconds):

This uses an equation similiar like the infamous speed equation. It divides the "Refreshed" value (taken from "Server info" below) over the time (in seconds).

If you tried to connect more than once, then "Ref/s" will get the Average of all Tries' Ref/s.

Links

.
* RapidShare * ----->[ Link nur für registrierte Mitglieder sichtbar. Bitte einloggen oder neu registrieren ]



Scan Reports:

- [ Link nur für registrierte Mitglieder sichtbar. Bitte einloggen oder neu registrieren ]

- [ Link nur für registrierte Mitglieder sichtbar. Bitte einloggen oder neu registrieren ]

- [ Link nur für registrierte Mitglieder sichtbar. Bitte einloggen oder neu registrieren ]

Regarding those scan results, See [1], [2] & [3] in the FAQ section below for an answer.

Most replies here are about the scans.
So, I've just wrote a permanent answer for everyone to see in FAQ section about it.
Please, read the FAQ section before attempting to reply.

Change Log

In This Section I will List out the Log of the Version of LogSro. You can Check here the moment
you enter this Thread for further Versions releases and Info.

Code:

* v2.1 : 20-Mar-2009

- Fixed "Max" value.
- Fixed "Refreshed" & "Ref/s" value
- Fixed hitting confirm delay.


* v2.0 : 29-Jan-2009

- Automatically launchs Sro Server List when starting LogSro
- Added Auto-updating LogSro "Server Name" list function
- Added "Server info"
- Added "Ref/s" (refreshs per second) in the "Records"
- Removed unneccesary buttons (Save & Downloads)
- Removed "Refresh Rate" input (always at your own PC speed limit now)
- Even faster refreshing speed now

* v1.2 : 18-May-2008

- Fixed "Fastest !!" Mode ( When Refresh Rate = 0 )
- Fixed Problem : hits Confirm immediately when try a second time
- HotKeys Changed to Alt instead of Shift
- Removed Hot Key for "Stop S*****" Due to Problems

* v1.1 : 17-May-2008

- ALL LIMITS/BUGS FROM LAST VERSION WERE FIXED
- Option , Server Name. Helped with by nedtheone
- Option ,Free Slot No. Helped with by nedtheone
- Opition ,Save Settings
- Records Board
- New Refresh Rate Option , " Fastest !! "
- New Look. Helped with by FrankkkoJ.
- Hot Keys

* v1.0.1 : 11-May-2008

- 1st Loop Function Completed
- 5 Limits Presented

F.A.Q.
(Read it Before asking!)

- Last time updated: 22/3/2009 -

[1] I found a Trojan/virus in the Sro Server list!

About the scan results, they are just not true (false positives due to the way the program is coded).

Thanx to martas for this logical answer!

[2] My Anti-virus is blocking (or deleting) the Server list!

If you Anti-virus is blocking/deleteing it, then see if you can enlist the server list in your anti-virus "trusted programs" list. (Somewhere in the option, but not all anti-viruses has it). If you have no other choice to turn it off temporarliy enough to use the server list every time you want to use it OR try and find another anti-viurs that have a "trusted programs" list. (Do not ask me which one has it.... just search)

[3] I found a Trojan/virus in LogSro itself!

This is LogSro.exe ALONE scan: [ Link nur für registrierte Mitglieder sichtbar. Bitte einloggen oder neu registrieren ]

You must have scanned the whole package which contains the sro server list. Your scan must have detected the server list as a threat.

See [1] & [2] for more details about the server list scan result issue.

Thanx to martas for noticing this issue

[4] "I dont have permission to access this file". I always have that error message when I try to open the Serverlist.

Right click on the Serverlist file > Run as > Admin

.
[5] What loader or/and bot can Logsro work with ?

Any Loader or bot can be used along with Logsro.
As long as the name of the sro window remains as "SRO_Client" just while trying to login.

However, If it's agbot then you must not patch with agbot media patcher. Instead, you should use testosterone's (a loader) redirect ip.

Check [7] for more details.

[6] I can't extract this "Sro Server List" from the zipped package.
/ Where is this "Sro Server List"? I've extract the package and I didn't see it.

The server list is there in the package already. Your anti-virus (or firewall sometimes) is deleting it the moment you extract it out. Just disable your anti-virus temporarily enough to extract it.

There is a chance that the anti-virus will delete it once turn it ON back again. As a result, you might need to use another anti-virus.

See [1] & [2] for more details about the server list scan result issue.

.
[7] Sro Server List: "Disconnected from Server". It's like that no matter how many times I press the "Refresh" button there.

First, just try to press the "Refresh" button 2 or 3 times and see if it works.

If not, then you must have patched your media.pk2 with agbot media patcher. If you did, then unpatch using the same patcher on it again. You must use testosterone's "Redirect ip" function instead of patching. (Just tick the redirect ip box in testosterone when you want to use agbot, then press launch sro through testosterone to get started)

.
[8] Does LogSro work with agbot?

Yes, it does. However, you must not patch with agbot media patcher as it affects the sro server list. Instead Use testosterone's (a loader) redirect ip.

See [7] for more details.

[9] When I open server list I get an error "k2:Reader: Cant open file C;Program FilesSilkroadmedia.pk2, error = 3" and when I press ok it enters me in the list.Why?

I had that Error before... I dont know why its an error even because it get you back to the list normally .. to get rid of that error , put the server list Files ( Ithink there only two ) in the same folder of Silkroad.

.
[10]What resolution are compatible with this s*****?

Supports all resolution as well as window mode.

.
[11] when I start the s*****, the server list and Logsro program must be in front of the silkroad window?

Not necessary. You can even do other stuff while LogSro tries to login. Just make sure you do not interrupt logsro pressing anywhere inside LogSro window. It would then stops it.

.
[12]Sometimes, When I press "Start" in LogSro it stops then immediately after LogSro says "Waiting for 1.5 sec...". Why does that happen?

Yeah, It happens to me too. It's a bug in the loop of LogSro. It only happens sometimes, so just press start again and it will work. After starting, you will notice that would stop when you press anywhere inside logsro window. Not just when pressing stop.

.
[13] Is there any possibility of getting Ban!?

Nope.
LogSro is only a macro that presses the confirm button , using the Sro server list , at the right time.

.
[14]It needs , if possible , an image verification writer , so if it didn't login , it'll retry again Automatically.

I'm trying to figure it out.

.
[15]If theres a way to make the server list built into the program? if so i think it would solve that d/c problem and the thing that happens when it wont start.

I'm working making my own server list.

.
[16]I don't understand... why can I not login when there are 3 free slots available ?

Its just because of traffic. In other words, 3 Persons pressed confirm at that time before you.

.
[17] I'm using McAfee and it refuses to let me open server list.

Right click on the Mcafee icon (right under of youre screen)
Click on Virusscan-console
the first and the second thing must be off
in Dutch (toegangsbeveiliging en bufferoverloop beveiliging)

Normaly then it must work ^^
Thanx to KillahIf still no good, then just use another anti-virus. (again, don't ask me which one to use)

---------