[blackra1n___]

Hallo ,

Ich möchte Snow Leapard auf meinem Rechner installieren , nur ich habe einen Core i3 prozessor . Ich habe davon gehört das es geht , nur ich verstehe es nicht richtig
Hier eine nachricht von einem User den ich gefragt habe

{English}

Hey

What you need:

Mac OS 10.6.4 Combo Update: http://support.apple.com/kb/dl1048

iBoot Supported CD : http://tonymacx86.blogspot.com/2010/...ernel-for.html

Retail Snow Leopard

MultiBeast : http://tonymacx86.blogspot.com/2010/...tallation.html

Step One Graphics

The Intel HD Graphics aren't supported by Mac OS X yet so you're best buying a cheap graphics card.
I bought the nVidia Geforce 8400GS

http://www.ebuyer.com/product/161824

Step Two

Hook up you're Monitor through you're new Graphics card.

Step Three BIOS

Make sure In the BIOS Integrated Peripherals such as SATA AHCI Mode is set to AHCI and not IDE.

In Power Management set HPET Support: "Enabled" and HPET Mode "64-bit mode"

Make sure the boot order is CD Drive the Hard Drive

Step Four

Stick in you're iBoot Supported CD and restart you're computer
Once the boot-loader had loaded take out the iBoot CD and stick in the Snow Leopard DVD then hit F5
Once you see the DVD icon saying Snow Leopard hit the Enter button.
If this doesn't properly boot try again but after you hit F5 and you see the Snow Leopard DVD hit F8 and type "busratio=22" then enter

Step 5

After the installer has loaded go to the Utilities menu and select "Disk Utility"
Select You're Hard Drive from the left hand side
Then select the Erase button and Select Mac OS Extended ( Journaled )
Then Give it a name like "Macintosh HD"
Then hit the smaller "Erase" button
Exit Disk Utility

Step 6

Install Mac OS X

Step 7

Once Mac OS X has been installed and while the computer is restarting take out the Retail Snow Leopard DVD and stick the iBoot CD back in.
At the boot-loader screen select your Hard Drive

Step 8

Once in Mac OS X open up the Mac OS 10.6.4 combo update from a USB flash drive or similar device.
Install that
Then Open up MultiBeast and install Chameleon Boot-loader RC4 and appropriate drivers for your system and restart
This time remove the iBoot cd and let the computer boot straight from your hard drive.

There you have it you should have a Core i3 Hackintosh

I'm going to do a more detailed blog on my website but I hope that helps for now

Nun meine frage , da ich im englischen nicht so gut bin
Hatt Jemand etwas verstanden ? Wenn ja könnte er eine erklärung
auf deutsch schreiben ?

Danke schonmal im Vorraus