[jakui]

Ich bin der totale noob wenns um Linux geht. Ich will meine wlan Karte zum laufen kriegen...
Dies scheitert aber an fehlenden treibern.
Ich hab in einem Forum folgendes gefunden.. und wollte wissen ob jemand zufällig ne ahnung hat was ich damit anfangen kann?
ist das evtl ein Treiber, und wenn ja, wie installier/kompilier ich den?

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index fa8ab13..9d6cc65 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -753,5 +753,6 @@ source "drivers/net/wireless/b43/Kconfig"
source "drivers/net/wireless/b43legacy/Kconfig"
source "drivers/net/wireless/zd1211rw/Kconfig"
source "drivers/net/wireless/rt2x00/Kconfig"
+source "drivers/net/wireless/mrv8k/Kconfig"

endmenu
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 3af665d..0c4002b 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -67,3 +67,4 @@ obj-$(CONFIG_P54_USB) += p54usb.o
obj-$(CONFIG_P54_PCI) += p54pci.o

obj-$(CONFIG_ATH5K) += ath5k/
+obj-$(CONFIG_MRV8K) += mrv8k/
diff --git a/drivers/net/wireless/mrv8k/COPYING b/drivers/net/wireless/mrv8k/COPYING
new file mode 100644
index 0000000..e90dfed
--- /dev/null
+++ b/drivers/net/wireless/mrv8k/COPYING
@@ -0,0 +1,340 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the s*****s used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/drivers/net/wireless/mrv8k/Kconfig b/drivers/net/wireless/mrv8k/Kconfig
new file mode 100644
index 0000000..35f1bd6
--- /dev/null
+++ b/drivers/net/wireless/mrv8k/Kconfig
@@ -0,0 +1,19 @@
+config MRV8K
+ tristate "Marvell 88w8335 Libertas PCMCIA-wireless support"
+ depends on PCMCIA && MAC80211 && WLAN_80211 && EXPERIMENTAL
+ select FW_LOADER
+ ---help---
+ This is an experimental driver for the Marvell 88w8335 Libertas wireless
+ chip, present in many PCMCIA-wireless adapters.
+
+ Device firmware is required alongside this driver. You can download
+ the firmware cutter from [ Link nur für registrierte Mitglieder sichtbar. Bitte einloggen oder neu registrieren ]
+
+config MRV8K_DEBUG
+ bool "Marvell 88w8335 Libertas debugging"
+ depends on MRV8K
+ ---help---

+ MRV8K debugging messages. Choosing Y will result in additional debug
+ messages being saved to your kernel logs, which may help debug any
+ problems.
+
diff --git a/drivers/net/wireless/mrv8k/Makefile b/drivers/net/wireless/mrv8k/Makefile
new file mode 100644
index 0000000..054977d
--- /dev/null
+++ b/drivers/net/wireless/mrv8k/Makefile
@@ -0,0 +1,11 @@
+obj-$(CONFIG_MRV8K) += mrv8.o
+
+
+
+
+
+
+ifeq ($(CONFIG_MRV8K_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
+
diff --git a/drivers/net/wireless/mrv8k/README b/drivers/net/wireless/mrv8k/README
new file mode 100644
index 0000000..f964115
--- /dev/null
+++ b/drivers/net/wireless/mrv8k/README
@@ -0,0 +1,31 @@
+Linux driver for Marvell Libertas PCI wireless chipset
+Copyright(c) Andrea Merello, 2007
+Released unter the terms of GPL license
+
+--------------------------------------------------------------------
+Currently this driver is under development and can't be considered
+finished.
+It's currently using the d80211 stack, so you will need a kernel from
+wireless-dev git tree.
+As the Marvell chip can do MAC handling (at least partially) in HW it
+is possible I will change, and d80211 stack will become unnecessary.
+For now FullMAC implementation in firmware is not used.
+
+For now the driver supports only BSS STA mode and monitor mode.
+Scan, sw encryption and MAC address changing should also work.
+
+Monitor mode is mostly functional, but not perfect, as FW filters certain
+packets. It is possible to see frames sent to all MAC addresses in any BSS
+on the selected channel, but certain particular frames, like ACKs are
+not passed by the card to upper layer. It is unsure if there is any way
+to obtain this.
+
+IBSS and AP mode are currently disabled.
+
+----IMPORTANT NOTE----
+For using this driver you will need marvell firmware.
+You can obtain it using the utility for firmware extracting published
+my Luc Saillard on his website or using the firmware package for BSD
+malo driver.
+The driver will load the firmware while loading the module (this may
+change in future) and it is normal it will take several seconds.
diff --git a/drivers/net/wireless/mrv8k/TODO b/drivers/net/wireless/mrv8k/TODO
new file mode 100644
index 0000000..28ee8dc
--- /dev/null
+++ b/drivers/net/wireless/mrv8k/TODO
@@ -0,0 +1,5 @@
+Check for the RX reschedule
+Check for TX skb free ------ should be ok
+Check for SSI and NF
+Check for rates and txpower
+
diff --git a/drivers/net/wireless/mrv8k/mrv8.c b/drivers/net/wireless/mrv8k/mrv8.c
new file mode 100644
index 0000000..3695c19
--- /dev/null
+++ b/drivers/net/wireless/mrv8k/mrv8.c
@@ -0,0 +1,1668 @@
+/*
+ d80211 Marvell Libertas PCI driver
+
+ Copyright (c) 2007 Andrea Merello <[email protected]>
+
+ Based on existent mrv8k linux alpha driver
+ Copyright (c) 2005 Luc Saillard <[email protected]>
+
+ Based on BSD malo driver
+ Copyright (c) 2006 Claudio Jeker <[email protected]>
+ Copyright (c) 2006 Marcus Glocker <[email protected]>
+ (no code has been copyed. Hw programming methods
+ magic values, and card specific programming details
+ had been looked at)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+#include <linux/firmware.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/etherdevice.h>
+#include <asm/semaphore.h>
+#include <net/mac80211.h>
+#include <net/ieee80211_radiotap.h>
+
+#include "mrv8.h"
+
+MODULE_AUTHOR(DRV_COPYRIGHT);
+MODULE_DES*****ION(DRV_DES*****ION);
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+
+#if !defined(MAC_ARG)
+#define MAC_ARG(x) (\
+((u8 *)(x))[0], ((u8 *)(x))[1], \
+((u8 *)(x))[2], ((u8 *)(x))[3], \
+((u8 *)(x))[4], ((u8 *)(x))[5])
+#endif
+
+static struct pci_device_id mrv_pci_tbl[] = {
+ {PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_W8K, 0x1FA4, 0x11AB, 0, 0, WL3563 },
+ {PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_W8K, 0x1FA5, 0x16AB, 0, 0, WL3563 },
+ {PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_W8K, 0x1FA6, 0x16AB, 0, 0, WL3563 },
+ {PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_W8K, 0x1FA7, 0x16AB, 0, 0, WL3563 },
+ {PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_W8K, 0x138f, 0x1043, 0, 0, WL138G },
+ {PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_W8K, 0x128f, 0x1043, 0, 0, WL138G },
+ {PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_W8K, 0x108f, 0x1043, 0, 0, WL138G },
+ /* NETGEAR WG311v3 802.11g Wireless PCI Adapter */
+ {PCI_VENDOR_ID_MARVELL, 0x1faa, PCI_ANY_ID, PCI_ANY_ID, 0x6b00, 0x1385, W8335},
+ {PCI_VENDOR_ID_MARVELL, 0x1faa, PCI_ANY_ID, PCI_ANY_ID, 0, 0, W8335},
+ {PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_W8K, PCI_ANY_ID, PCI_ANY_ID, 0, 0, WLGENERIC },
+ {0,}
+};
+
+static void mrv_deinit_cmd(struct mrv_priv *priv)
+{
+ if (priv->cmd_virt)
+ pci_free_consistent(priv->pdev,
+ MRV_CMD_PKT_SIZE,
+ priv->cmd_virt, priv->cmd_dma);
+
+ if (priv->magic_virt)
+ pci_free_consistent(priv->pdev, 4,
+ priv->magic_virt, priv->magic_dma);
+}
+
+static void mrv_free_rx_ring(struct mrv_priv *priv)
+{
+ int i;
+ for (i = 0; i < MRV_RX_DESC_NUM; i++) {
+ dev_kfree_skb(priv->rx_skb[i]);
+ pci_free_consistent(priv->pdev,
+ sizeof(struct mrv_rx_des*****or),
+ priv->rx_ring_virt[i],
+ priv->rx_ring_dma[i]);
+ }
+
+}
+
+static void mrv_free_tx_ring(struct mrv_priv *priv)
+{
+ int i, j;
+ for (i = 0; i < MRV_TX_DESC_NUM; i++)
+ pci_free_consistent(priv->pdev,
+ sizeof(struct mrv_tx_des*****or),
+ priv->tx_ring_virt[i],
+ priv->tx_ring_dma[i]);
+
+ for (i = 0; i < priv->tx_pending; i++) {
+ j = priv->tx_r_idx;
+ dev_kfree_skb(priv->tx_skb[j]);
+ if (j == MRV_TX_DESC_NUM - 1)
+ j = 0;
+ else
+ j++;
+ }
+}
+
+static int mrv_init_cmd(struct mrv_priv *priv)
+{
+ void *v;
+ dma_addr_t p;
+ v = pci_alloc_consistent(priv->pdev, MRV_CMD_PKT_SIZE, &p);
+ priv->cmd_virt = v;
+
+ if (v == NULL) {
+ printk(KERN_ERR"Can't allocate CMD memory\n");
+ return -ENOMEM;
+ }
+
+ priv->cmd_dma = p;
+ v = pci_alloc_consistent(priv->pdev, 4, &p);
+ priv->magic_virt = v;
+
+ if (v == NULL) {
+ printk(KERN_ERR"Can't allocate MAGIC memory\n");
+ return -ENOMEM;
+ }
+
+ priv->magic_dma = p;
+ *priv->magic_virt = cpu_to_le32(MRV_CMD_MAGIC);
+
+ return 0;
+}
+
+static void _mrv_send_cmd(struct mrv_priv *priv, u32 addr)
+{
+ /* printk(KERN_ERR"_mrv_send_cmd\n");*/
+ wmb();
+ mrv_reg_write32(priv, MRV_REG_CMD_PTR, addr);
+ mrv_reg_mb(priv);
+ mrv_reg_write32(priv, MRV_REG_GEN_ARM_INT, 2);
+ mrv_reg_mb(priv);
+}
+
+static inline void mrv_send_cmd(struct mrv_priv *priv)
+{
+ /* printk(KERN_ERR"mrv_send_cmd\n");*/
+ _mrv_send_cmd(priv, priv->cmd_dma);
+}
+
+static int mrv_send_cmd_sync(struct mrv_priv *priv)
+{
+ int err;
+
+ /* printk(KERN_ERR"mrv_send_cmd_sync\n");*/
+ down(&priv->cmd_sem);
+ err = 0;
+ priv->cmd_status = 0x10000;
+ mrv_send_cmd(priv);
+
+ /* printk(KERN_ERR"mrv_send_cmd_time\n");*/
+ wait_event_interruptible_timeout(priv->wait_command_queue,
+ (priv->cmd_status != 0x10000), 500);
+ /* printk(KERN_ERR"mrv_send_cmd_timeout\n");*/
+
+ if (priv->cmd_status == 0x10000) {
+ printk(KERN_ERR"Command timeout\n");
+ err = -1;
+ } else if (priv->cmd_status == 3) {
+ printk(KERN_WARNING"Command deferred!\n");
+ err = 0;
+ } else if (priv->cmd_status != 0) {
+ printk(KERN_ERR"Command failed with status %x\n", priv->cmd_status);
+ err = -1;
+ } else {
+ printk(KERN_ERR"status %x\n", priv->cmd_status);
+ }
+
+ up(&priv->cmd_sem);
+
+ return err;
+}
+
+static inline struct mrv_cmd_hdr *mrv_cmd(struct mrv_priv *priv,
+ int cmd,
+ int len,
+ int status,
+ int sq)
+{
+ struct mrv_cmd_hdr *ret;
+
+ /* printk(KERN_ERR"mrv_cmd %x %x %x %x\n", cmd, len, status, sq);*/
+
+ ret = (struct mrv_cmd_hdr *)priv->cmd_virt;
+ ret->type = cpu_to_le16(cmd);
+ ret->len = cpu_to_le16(len);
+ ret->status = cpu_to_le16(status);
+ ret->sq = cpu_to_le16(sq);
+ return ret;
+}
+
+static int mrv_upload_fw(struct mrv_priv *priv)
+{
+ struct mrv_cmd_hdr *cmd;
+ u8 *cmd_data;
+ const struct firmware *img = NULL;
+ int i, j, sq, err;
+
+ err = request_firmware(&img, FW_BOOT_FILENAME, &priv->pdev->dev);
+ if (err < 0) {
+ printk(KERN_ERR"request_firmware for boot img failed: Reason %d\n", err);
+ return err;
+ }
+
+ mrv_reg_write32(priv, MRV_REG_STATUS, 0);
+ mrv_reg_mb(priv);
+ mrv_mem_write16(priv, MRV_MEM_CMD_BOOT, MRV_CMD_FW);
+ mrv_mem_write16(priv, MRV_MEM_CMD_BOOT+2, img->size);
+ mrv_mem_write32(priv, MRV_MEM_CMD_BOOT+4, 0);
+
+ for (i = 0; i < img->size; i++)
+ mrv_mem_write8(priv, MRV_MEM_CMD_BOOT+8+i, (img->data)[i]);
+
+ release_firmware(img);
+
+ _mrv_send_cmd(priv, MRV_HWMEM_CMD_BOOT);
+
+ for (i = 0; i < 500; i++) {
+ if (mrv_reg_read32(priv, MRV_REG_STATUS) == 0x5)
+ mdelay(1);
+ break;
+ }
+ if (i == 10) {
+ printk(KERN_ERR"Timeout while loading boot fw \n");
+ return -1;
+ }
+ /*printk(KERN_INFO"Bootstrap loaded OK, jumping in..\n");*/
+ mrv_mem_write16(priv, MRV_MEM_CMD_BOOT, MRV_CMD_FW);
+ mrv_mem_write16(priv, MRV_MEM_CMD_BOOT+2, 0);
+ mrv_mem_write32(priv, MRV_MEM_CMD_BOOT+4, 0);
+
+ _mrv_send_cmd(priv, MRV_HWMEM_CMD_BOOT);
+
+ /* the boot code is stupid enought that it does not report any status when it
+ * loads correctly and become alive. Wait 1 second..*/
+ msleep(1000);
+
+ err = request_firmware(&img, FW_FIRMWARE_FILENAME, &priv->pdev->dev);
+ if (err < 0) {
+ printk(KERN_ERR"request_firmware for fw img2 failed: Reason %d\n", err);
+ return err;
+ }
+
+ sq = 1;
+ for (i = 0; (i+256) < img->size; i += 256) {
+ mrv_reg_write32(priv, MRV_REG_STATUS, 0);
+ mrv_reg_mb(priv);
+ cmd = mrv_cmd(priv, MRV_CMD_FW, 256, 0, sq++);
+ cmd_data = MRV_CMD_PAYLOAD(cmd) ;
+ memcpy(cmd_data, img->data + i, 256);
+ mrv_send_cmd(priv);
+ for (j = 0; j < 500; j++) {
+ if (mrv_reg_read32(priv, MRV_REG_STATUS) == 5)
+ break;
+ mdelay(1);
+ }
+ if (j == 500) {
+ printk(KERN_ERR"Boot FW has failed to transfer real FW\n");
+ return -2;
+ }
+ }
+
+ if (i < img->size) {
+ mrv_reg_write32(priv, MRV_REG_STATUS, 0);
+ mrv_reg_mb(priv);
+ cmd = mrv_cmd(priv, MRV_CMD_FW, img->size - i, 0, sq++);
+ cmd_data = MRV_CMD_PAYLOAD(cmd) ;
+ memcpy(cmd_data, img->data + i, img->size - i);
+ mrv_send_cmd(priv);
+ for (j = 0; j < 500; j++) {
+ if (mrv_reg_read32(priv, MRV_REG_STATUS) == 5)
+ break;
+ mdelay(1);
+ }
+ if (j == 500) {
+ printk(KERN_ERR"Boot FW has failed to transfer last real FW chunk\n");
+ return -2;
+ }
+ }
+
+ release_firmware(img);
+
+ cmd = mrv_cmd(priv, MRV_CMD_FW, 0, 0, sq);
+
+ mrv_send_cmd(priv);
+ msleep(100);
+
+ for (i = 0; i < 200; i++) {
+ mrv_reg_write32(priv, MRV_REG_CMD_PTR, 0x5a);
+ mrv_reg_mb(priv);
+ if (mrv_reg_read32(priv, MRV_REG_STATUS) == MRV_FW_SIGNATURE)
+ break;
+ mdelay(10);
+ }
+
+ if (i == 200) {
+ printk(KERN_ERR"FW is not alive or returned error %x \n",
+ mrv_reg_read32(priv, MRV_REG_STATUS));
+ return -1;
+ }
+
+ priv->fw_load = 1;
+ printk(KERN_INFO"Firmware for mrv loaded successfully\n");
+
+ return 0;
+}
+
+static void mrv_int_enable(struct mrv_priv *priv)
+{
+ mrv_reg_write32(priv, MRV_REG_INTA_MASK, MRV_INTA_MASK);
+ mrv_reg_write32(priv, MRV_REG_INTB_MASK, MRV_INTB_MASK);
+ mrv_reg_mb(priv);
+}
+
+static void mrv_int_disable(struct mrv_priv *priv)
+{
+ mrv_reg_write32(priv, MRV_REG_INTA_MASK, 0);
+ mrv_reg_write32(priv, MRV_REG_INTB_MASK, 0);
+ mrv_reg_mb(priv);
+}
+
+static int mrv_tx(struct ieee80211_hw *dev,
+ struct sk_buff *skb,
+ struct ieee80211_tx_control *control)
+{
+ struct ieee80211_hdr *hdr;
+ struct mrv_tx_des*****or *txd;
+ unsigned long flags;
+ struct mrv_priv *priv = dev->priv;
+
+ spin_lock_irqsave(&priv->tx_lock, flags);
+
+ if (skb->len < sizeof(struct ieee80211_hdr)) {
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
+ return NETDEV_TX_OK;
+ }
+
+ if (priv->tx_pending >= (MRV_TX_DESC_NUM-2)) {
+ ieee80211_stop_queue(dev, 0);
+ }
+
+ if (skb_headroom(skb) < dev->extra_tx_headroom) {
+ if (pskb_expand_head(skb, dev->extra_tx_headroom, 0, GFP_ATOMIC)) {
+ printk(KERN_ERR "failed to allocate room for TX "
+ "header\n");
+ kfree_skb(skb);
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
+ return -ENOMEM;
+ }
+ }
+
+ priv->tx_pending++;
+ priv->tx_skb[priv->tx_w_idx] = skb;
+ txd = priv->tx_ring_virt[priv->tx_w_idx];
+
+ if (priv->tx_w_idx == MRV_TX_DESC_NUM-1)
+ priv->tx_w_idx = 0;
+ else
+ priv->tx_w_idx++;
+
+ memcpy(txd->dest_addr,
+ ieee80211_get_DA((struct ieee80211_hdr *)skb->data), 6);
+
+ skb_push(skb, dev->extra_tx_headroom);
+
+ *((u16 *)skb->data) = cpu_to_le16(skb->len) - 32;
+
+ memcpy(skb->data+2, skb->data+8, 24); /* move 80211 header */
+ hdr = (struct ieee80211_hdr *)skb->data + 2;
+ memcpy(skb->data+2+24, &(hdr->addr4), 6); /* copy addr4 */
+
+ txd->len = cpu_to_le16(skb->len);
+
+ txd->dma_addr = cpu_to_le32(pci_map_single(priv->pdev,
+ skb->data, skb->len, PCI_DMA_TODEVICE));
+
+ txd->priority = control->queue;
+ /*txd->rate = control->tx_rate;*/
+
+ txd->status = cpu_to_le16(1);
+ txd->fwowner = cpu_to_le16(0x8000);
+ wmb();
+ mrv_reg_write32(priv, MRV_REG_GEN_ARM_INT, 1);
+ mrv_reg_mb(priv);
+
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
+
+ return NETDEV_TX_OK;
+}
+
+static void mrv_tx_cb_tasklet(struct mrv_priv *priv)
+{
+ struct mrv_tx_des*****or *txd;
+ int status;
+ unsigned long flags;
+ struct ieee80211_tx_status tx_status = { {0} };
+
+ spin_lock_irqsave(&priv->tx_lock, flags);
+
+ while (priv->tx_r_idx != priv->tx_w_idx) {
+ txd = priv->tx_ring_virt[priv->tx_r_idx];
+
+ if (le16_to_cpu(txd->fwowner) & 0x8000)
+ break;
+
+ status = le16_to_cpu(txd->status) & 0x1;
+ if (status == 0)
+ tx_status.excessive_retries = 1;
+ tx_status.queue_number = txd->priority;
+
+ pci_unmap_single(priv->pdev, txd->dma_addr,
+ priv->tx_skb[priv->tx_r_idx]->len, PCI_DMA_TODEVICE);
+
+ ieee80211_tx_status_irqsafe(priv->dev,
+ priv->tx_skb[priv->tx_r_idx], &tx_status);
+
+ priv->tx_pending--;
+
+ if (priv->tx_pending == MRV_TX_DESC_NUM-2)
+ ieee80211_wake_queue(priv->dev, 0);
+
+ if (priv->tx_r_idx == MRV_TX_DESC_NUM-1)
+ priv->tx_r_idx = 0;
+ else
+ priv->tx_r_idx++;
+ }
+
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
+}
+
+static void mrv_rx_tasklet(struct mrv_priv *priv)
+{
+ int len, count = 0;
+ struct ieee80211_rx_status rx_status = {0};
+ struct mrv_rx_des*****or *rxd;
+ struct sk_buff *skb;
+
+ for (count = 0; count < MRV_MAX_RX_INT; count++) {
+ rxd = priv->rx_ring_virt[priv->rx_idx];
+ skb = priv->rx_skb[priv->rx_idx];
+
+ if ((rxd->drvowner & 0x80) == 0)
+ break;
+ if (mrv_mem_read32(priv, priv->RxHwDmaR) ==
+ mrv_mem_read32(priv, priv->RxHwDmaW))
+ break;
+
+ len = le16_to_cpu(rxd->datalen);
+
+ if (len > 3) {
+
+ rx_status.ssi = rxd->rssi;
+ /* rx_status.antenna = (hdr->signal >> 7) & 1;
+ rx_status.signal = quality;
+ rx_status.rate = rxd->rate;
+ rx_status.freq = mrv_channels[rxd->chan -1].freq;
+ rx_status.channel = rxd->chan;
+ rx_status.phymode = priv->dev->conf.phymode;
+ rx_status.mactime = le64_to_cpu(hdr->mac_time);*/
+
+ pci_unmap_single(priv->pdev, rxd->dma_data,
+ MRV_RX_PAYLOAD_LEN, PCI_DMA_FROMDEVICE);
+
+ /*This is the madness of how firmware reworks packets...
+ * So we have to cut out this damn garbage the firmware
+ * puts at the beginning and in the middle of packets.....
+ */
+ skb_put(skb, len);
+ skb_pull(skb, 2);
+
+ if (skb->len > 30) {
+ memcpy(skb->data + 24, skb->data + 30, skb->len - 6);
+ skb_trim(skb, skb->len - 6);
+ }
+ /*if (skb->len < 50) {
+ printk("\n.........");
+ for(i=0;i<skb->len;i++)
+ printk("%x ", skb->data[i]);
+ }
+ */
+ ieee80211_rx_irqsafe(priv->dev, skb, &rx_status);
+
+ /*TODO check for failure */
+ skb = dev_alloc_skb(MRV_RX_PAYLOAD_LEN);
+ priv->rx_skb[priv->rx_idx] = skb;
+
+ rxd->dma_data = cpu_to_le32(pci_map_single(priv->pdev,
+ skb->data, MRV_RX_PAYLOAD_LEN, PCI_DMA_FROMDEVICE));
+ }
+
+ rxd->drvowner = 0;
+
+ if (priv->rx_idx == MRV_RX_DESC_NUM-1)
+ priv->rx_idx = 0;
+ else
+ priv->rx_idx++;
+ wmb();
+ mrv_mem_write32(priv, priv->RxHwDmaR, priv->rx_ring_dma[priv->rx_idx]);
+ }
+
+ /*rxd = priv->rx_ring_virt[priv->rx_idx];
+ if (priv->up && ((rxd->drvowner & 0x80)!= 0))
+ tasklet_schedule(&priv->mrv_rx_tasklet);*/
+}
+
+irqreturn_t mrv_interrupt(int irq, void *data)
+{
+ struct mrv_priv *priv = (struct mrv_priv *) data;
+ struct mrv_cmd_hdr *cmd;
+ unsigned int status;
+ unsigned int flags;
+
+ spin_lock_irqsave(&priv->irq_th_lock, flags);
+
+ if (!priv->fw_load) {
+ spin_unlock_irqrestore(&priv->irq_th_lock, flags);
+ return IRQ_NONE;
+ }
+
+ mrv_int_disable(priv);
+
+ status = mrv_reg_read32(priv, MRV_REG_ISR);
+
+ if (status == 0xFFFFFFFF) {
+ spin_unlock_irqrestore(&priv->irq_th_lock, flags);
+ mrv_int_enable(priv);
+ return IRQ_NONE;
+
+ }
+ status &= MRV_INTA_MASK;
+
+ if (status == 0) {
+ spin_unlock_irqrestore(&priv->irq_th_lock, flags);
+ mrv_int_enable(priv);
+ return IRQ_NONE;
+ }
+
+ if (status & 0x4) {
+ cmd = (struct mrv_cmd_hdr *)priv->cmd_virt;
+ priv->cmd_status = le16_to_cpu(cmd->status);
+ wake_up_interruptible(&priv->wait_command_queue);
+ }
+
+ if (status & 0x2)
+ tasklet_schedule(&priv->mrv_rx_tasklet);
+
+ if (status & 0x1)
+ tasklet_schedule(&priv->mrv_tx_cb_tasklet);
+
+ status = status & ~(0x4|0x2|0x1);
+
+ mrv_reg_write32(priv, MRV_REG_ISR, status);
+ mrv_reg_mb(priv);
+
+ mrv_int_enable(priv);
+ spin_unlock_irqrestore(&priv->irq_th_lock, flags);
+ return IRQ_HANDLED;
+}
+
+/*
+static void dump_reg(struct mrv_priv *priv)
+{
+//
+ 0 HIU host interf 0c pci interf
+ 2 CIU
+ 4 SQRAM
+ 6 SDRAM
+ 8 FEMAC
+ a WLMAC. a0 WLMACTXCONFIG ,a2 WLMACRXCONFIG
+ c LBU. c2 eeprom, c4 rf, c6 BB, c8 lsbu
+ d GPIO. d8, pwrmgmt
+ e DMA
+ //
+ int i;
+ for (i = 0; i < 0xfff; i++) {
+ if ( i % 18 == 0) printk("\n");
+ printk("%4x= %2x, ", i, mrv_reg_read8(priv, i));
+ }
+ }*/
+
+static int mrv_hw_start(struct mrv_priv *priv)
+{
+ int err;
+
+ err = request_irq(priv->pdev->irq, &mrv_interrupt, IRQF_SHARED,
+ DRV_NAME, priv);
+ if (err) {
+ printk(KERN_ERR"Error calling request_irq: %d.\n",
+ priv->pdev->irq);
+ return err;
+ }
+
+ mrv_reg_read32(priv, MRV_REG_ISR);
+ mrv_reg_write32(priv, MRV_REG_ISR, 0);
+ mrv_reg_write32(priv, 0xc20, 0x800f);
+ mrv_reg_write32(priv, 0xc24, 0x800f);
+ mrv_int_disable(priv);
+
+ err = mrv_upload_fw(priv);
+
+ if (err) {
+ free_irq(priv->pdev->irq, priv);
+ return err;
+ }
+
+ mrv_int_enable(priv);
+
+ return 0;
+}
+
+static void mrv_hw_halt(struct mrv_priv *priv)
+{
+ mrv_reg_write32(priv, MRV_REG_GEN_ARM_INT, (1 << 15));
+ mrv_reg_mb(priv);
+ mrv_int_disable(priv);
+ free_irq(priv->pdev->irq, priv);
+}
+
+static int mrv_set_antenna(struct mrv_priv *priv, int rtx, int param)
+{
+ struct mrv_cmd_hdr *cmd;
+ struct mrv_cmd_set_antenna *data;
+
+ /*printk(KERN_ERR"mrv_set_Antenna\n");*/
+
+ cmd = mrv_cmd(priv, MRV_CMD_SET_ANTENNA,
+ MRV_CMD_SET_ANTENNA_SZ, 0, 1);
+
+ data = (struct mrv_cmd_set_antenna *)MRV_CMD_PAYLOAD(cmd);
+
+ data->rtx = cpu_to_le16(rtx);
+ data->param = cpu_to_le16(param);
+
+ if (mrv_send_cmd_sync(priv)) {
+ printk(KERN_ERR"Could not set antenna\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int mrv_set_txpower(struct mrv_priv *priv, int param)
+{
+ struct mrv_cmd_hdr *cmd;
+ struct mrv_cmd_set_txpower *data;
+
+ /*printk(KERN_ERR"mrv_set_txpower\n");*/
+
+ cmd = mrv_cmd(priv, MRV_CMD_SET_TXPOWER,
+ MRV_CMD_SET_TXPOWER_SZ, 0, 1);
+
+ data = (struct mrv_cmd_set_txpower *)MRV_CMD_PAYLOAD(cmd);
+
+ data->txpower = cpu_to_le16(param);
+
+ if (mrv_send_cmd_sync(priv)) {
+ printk(KERN_ERR"Could not set txpower\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int mrv_set_radio(struct mrv_priv *priv, int enable, int preamble)
+{
+ struct mrv_cmd_hdr *cmd;
+ struct mrv_cmd_set_radio *data;
+
+ /*printk(KERN_ERR"mrv_set_radio\n");*/
+
+ cmd = mrv_cmd(priv, MRV_CMD_SET_RADIO,
+ MRV_CMD_SET_RADIO_SZ, 0, 1);
+
+ data = (struct mrv_cmd_set_radio *)MRV_CMD_PAYLOAD(cmd);
+
+ data->flag = cpu_to_le16(1);
+ data->preamble = cpu_to_le16(preamble);
+ data->enable = cpu_to_le16(enable);
+
+ if (mrv_send_cmd_sync(priv)) {
+ printk(KERN_ERR"Could not set radio\n");
+ return -1;
+ }
+ return 0;
+}
+
+/*
+static int mrv_set_allowed_rates(struct mrv_priv *priv, int allowg)
+{
+ struct mrv_cmd_hdr *cmd;
+ struct mrv_cmd_set_rates *data;
+ int i;
+
+ printk(KERN_ERR"mrv_set_allowed_rates\n");
+
+ cmd = mrv_cmd(priv, MRV_CMD_SET_RATES,
+ MRV_CMD_SET_RATES_SZ, 0, 1);
+
+ data = (struct mrv_cmd_set_rates *)MRV_CMD_PAYLOAD(cmd);
+
+ data->fixedrate = 0;
+ data->fixedindex = 0;
+
+ for (i = 0; i < 4; i++)
+ data->rates[i] = i;
+
+ for (; i < 14; i++)
+ if (allowg) data->rates[i] = i;
+ else data->rates[i] = 0;
+
+ if (mrv_send_cmd_sync(priv)) {
+ printk(KERN_ERR"Could not set rates\n");
+ return -1;
+ }
+
+ return 0;
+}
+*/
+
+static int mrv_set_slot(struct mrv_priv *priv, int shortslot)
+{
+ struct mrv_cmd_hdr *cmd;
+ struct mrv_cmd_set_slot *data;
+
+ /*printk(KERN_ERR"mrv_set_slot\n");*/
+
+ cmd = mrv_cmd(priv, MRV_CMD_SET_SLOT,
+ MRV_CMD_SET_SLOT_SZ, 0, 1);
+
+ data = (struct mrv_cmd_set_slot *)MRV_CMD_PAYLOAD(cmd);
+
+ data->action = cpu_to_le16(1);
+ data->shortslot = shortslot;
+
+ if (mrv_send_cmd_sync(priv)) {
+ printk(KERN_ERR"Could not set slot\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int mrv_set_prescan(struct mrv_priv *priv)
+{
+ struct mrv_cmd_hdr *cmd;
+
+ printk(KERN_ERR"mrv_set_prescan\n");
+
+ cmd = mrv_cmd(priv, MRV_CMD_SET_PRESCAN,
+ MRV_CMD_SET_PRESCAN_SZ, 0, 1);
+
+ if (mrv_send_cmd_sync(priv)) {
+ printk(KERN_ERR"Could not set prescan\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int mrv_set_postscan(struct mrv_priv *priv)
+{
+ struct mrv_cmd_hdr *cmd;
+
+ printk(KERN_ERR"mrv_set_postscan\n");
+
+ cmd = mrv_cmd(priv, MRV_CMD_SET_POSTSCAN,
+ MRV_CMD_SET_POSTSCAN_SZ, 0, 1);
+
+ if (mrv_send_cmd_sync(priv)) {
+ printk(KERN_ERR"Could not set postscan\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int mrv_set_channel(struct mrv_priv *priv,
+ struct ieee80211_channel *channel)
+{
+ struct mrv_cmd_hdr *cmd;
+ struct mrv_cmd_set_channel *data;
+ int ch;
+
+ ch = ieee80211_frequency_to_channel(channel->center_freq);
+
+ printk(KERN_ERR"mrv_set_channel %i\n", ch);
+
+ cmd = mrv_cmd(priv, MRV_CMD_SET_CHANNEL,
+ MRV_CMD_SET_CHANNEL_SZ, 0, 1);
+
+ data = (struct mrv_cmd_set_channel *)MRV_CMD_PAYLOAD(cmd);
+
+ data->flag = cpu_to_le16(1);
+ data->ch = ch;
+
+ if (mrv_send_cmd_sync(priv)) {
+ printk(KERN_ERR"Could not set channel\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int mrv_set_mac_addr(struct mrv_priv *priv, u8 addr[6])
+{
+ struct mrv_cmd_hdr *cmd;
+ struct mrv_cmd_set_mac_addr *data;
+
+ printk(KERN_ERR"mrv_set_mac\n");
+
+ cmd = mrv_cmd(priv, MRV_CMD_SET_MAC_ADDR,
+ MRV_CMD_SET_MAC_ADDR_SZ, 0, 1);
+
+ data = (struct mrv_cmd_set_mac_addr *)MRV_CMD_PAYLOAD(cmd);
+
+ memcpy(data->addr, addr, 6);
+
+ if (mrv_send_cmd_sync(priv)) {
+ printk(KERN_ERR"Could not set mac address\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static void mrv_set_bssid(struct mrv_priv *priv, u8 addr[6])
+{
+ int i;
+ u32 reg;
+
+ printk(KERN_ERR"mrv_set_bssid\n");
+
+ reg = mrv_reg_read32(priv, MRV_REG_RX_MODE);
+
+ if (is_valid_ether_addr(addr)) {
+ for (i = 0; i < 6; i++)
+ mrv_reg_write8(priv, MRV_REG_BSSID, addr[i]);
+
+ reg &= ~(2);
+ } else {
+ reg |= (2);
+ }
+
+ mrv_reg_write32(priv, MRV_REG_RX_MODE, reg);
+}
+
+static int mrv_read_config(struct mrv_priv *priv)
+{
+ struct mrv_cmd_hdr *cmd;
+ struct mrv_cmd_get_config *data;
+ int i;
+
+ /*printk(KERN_ERR"mrv_read_config\n");*/
+
+ cmd = mrv_cmd(priv, MRV_CMD_GET_CONFIG,
+ MRV_CMD_GET_CONFIG_SZ, 0, 1);
+
+ data = (struct mrv_cmd_get_config *)MRV_CMD_PAYLOAD(cmd);
+ data->Magic = cpu_to_le32(priv->magic_dma);
+
+ for (i = 0; i < MRV_CMD_GET_CONFIG_SZ; i++)
+ ((u8 *)data)[i] = 0;
+
+ for (i = 0; i < 6; i++)
+ data->MacAdr[i] = 0xff;
+
+ if (mrv_send_cmd_sync(priv)) {
+ printk(KERN_ERR"Could not read CFG\n");
+ return -1;
+ }
+
+ priv->AntNum = le16_to_cpu(data->AntNum);
+ priv->FwVer = le32_to_cpu(data->FwVer);
+ priv->HwVer = le16_to_cpu(data->HwVer);
+ priv->TxRingNum = le16_to_cpu(data->TxRingNum);
+ priv->RegionCode = le16_to_cpu(data->RegionCode);
+ priv->TxHwDma0 = le32_to_cpu(data->TxRing0) & 0xffff;
+ priv->TxHwDma1 = le32_to_cpu(data->TxRing1) & 0xffff;
+ priv->TxHwDma2 = le32_to_cpu(data->TxRing2) & 0xffff;
+ priv->TxHwDma3 = le32_to_cpu(data->TxRing3) & 0xffff;
+ priv->RxHwDmaR = le32_to_cpu(data->RxRingR) & 0xffff;
+ priv->RxHwDmaW = le32_to_cpu(data->RxRingW) & 0xffff;
+
+ SET_IEEE80211_PERM_ADDR(priv->dev, data->MacAdr);
+ printk(KERN_INFO"Card mac address is "MAC_FMT"\n",
+ MAC_ARG(priv->dev->wiphy->perm_addr));
+ printk(KERN_INFO"Fw V %x, Hw V %x, Antennas: %x, Region code %d\n",
+ priv->FwVer, priv->HwVer, priv->AntNum, priv->RegionCode);
+ /*printk(KERN_ERR"~mrv_read_config\n");*/
+ return 0;
+}
+
+static int mrv_alloc_rxring(struct mrv_priv *priv)
+{
+ struct mrv_rx_des*****or *v;/*,*_v;*/
+ dma_addr_t p;/*,_p;*/
+ int i;
+ /*printk(KERN_ERR"mrv_alloc_rxring\n");
+
+ _v = (struct mrv_rx_des*****or *) pci_alloc_consistent(priv->pdev, sizeof(struct
mrv_rx_des*****or), &_p);*/
+ for (i = 0; i < MRV_RX_DESC_NUM; i++) {
+ v = (struct mrv_rx_des*****or *) pci_alloc_consistent(priv->pdev, sizeof(struct
mrv_rx_des*****or), &p);
+ /* v = _v + i; p= _p + i*sizeof(struct mrv_rx_des*****or );*/
+ if (v == NULL) {
+ printk(KERN_ERR"Can't allocate RX des*****or memory\n");
+ /*FIXME dealloc what we done */
+ return -ENOMEM;
+ }
+
+ v->drvowner = 0;
+ v->status = cpu_to_le16(1);
+
+ priv->rx_ring_dma[i] = p;
+ priv->rx_ring_virt[i] = v;
+ priv->rx_skb[i] = dev_alloc_skb(MRV_RX_PAYLOAD_LEN);
+
+ if (priv->rx_skb[i] == NULL) {
+ printk(KERN_ERR"Can't allocate RX skb memory\n");
+ /*FIXME dealloc what we done */
+ return -ENOMEM;
+ }
+
+ priv->rx_ring_virt[i]->dma_data = cpu_to_le32(
+ pci_map_single(priv->pdev, priv->rx_skb[i]->data,
+ MRV_RX_PAYLOAD_LEN, PCI_DMA_FROMDEVICE));
+
+ if (i != 0)
+ priv->rx_ring_virt[i-1]->dma_next = cpu_to_le32(p);
+ }
+ priv->rx_ring_virt[i-1]->dma_next = cpu_to_le32(priv->rx_ring_dma[0]);
+ priv->rx_idx = 0;
+
+ /*printk(KERN_ERR"~mrv_alloc_rxring\n");*/
+ return 0;
+}
+
+static int mrv_alloc_txring(struct mrv_priv *priv)
+{
+ struct mrv_tx_des*****or *v;/*,*_v;*/
+ dma_addr_t p;/*,_p;*/
+ int i;
+
+ printk(KERN_ERR"mrv_alloc_txring\n");
+ for (i = 0; i < MRV_TX_DESC_NUM; i++) {
+ v = (struct mrv_tx_des*****or *) pci_alloc_consistent(priv->pdev, sizeof(struct
mrv_tx_des*****or), &p);
+ /* v = _v + i; p= _p + i*sizeof(struct mrv_tx_des*****or );*/
+ if (v == NULL) {
+ printk(KERN_ERR"Can't allocate TX des*****or memory\n");
+ /*FIXME dealloc what we done */
+ return -ENOMEM;
+ }
+
+ priv->tx_ring_dma[i] = p;
+ priv->tx_ring_virt[i] = v;
+
+ if (i != 0)
+ priv->tx_ring_virt[i-1]->dma_next = cpu_to_le32(p);
+ }
+ priv->tx_ring_virt[i-1]->dma_next = cpu_to_le32(priv->tx_ring_dma[0]);
+ priv->tx_r_idx = 0;
+ priv->tx_w_idx = 0;
+ priv->tx_pending = 0;
+
+ printk(KERN_ERR"~mrv_alloc_txring\n");
+ return 0;
+}
+
+static void mrv_set_dma_rings(struct mrv_priv *priv)
+{
+ /*printk(KERN_ERR"mrv_set_dma_rings %i, %x\n", priv->RxHwDmaR,
+ priv->rx_ring_dma[0]);*/
+ mrv_mem_write32(priv, priv->RxHwDmaR, priv->rx_ring_dma[0]);
+ /*printk(KERN_ERR"mrv_set_dma_rings 1\n");*/
+ mrv_mem_write32(priv, priv->RxHwDmaW, priv->rx_ring_dma[0]);
+ /*printk(KERN_ERR"mrv_set_dma_rings 2\n");*/
+ mrv_mem_write32(priv, priv->TxHwDma0, priv->tx_ring_dma[0]);
+ /*printk(KERN_ERR"~mrv_set_dma_rings\n");*/
+}
+
+static void mrv_stop(struct ieee80211_hw *dev)
+{
+ struct mrv_priv *priv = dev->priv;
+ /*printk(KERN_ERR"mrv_stop\n");*/
+
+ priv->up = 0;
+ tasklet_disable(&priv->mrv_rx_tasklet);
+ tasklet_disable(&priv->mrv_tx_cb_tasklet);
+ mrv_mem_write32(priv, priv->TxHwDma0, 0);
+ mrv_mem_write32(priv, priv->RxHwDmaR, 0);
+ mrv_mem_write32(priv, priv->RxHwDmaW, 0);
+ mrv_reg_mb(priv);
+ msleep(100); /* random */
+ tasklet_kill(&priv->mrv_rx_tasklet);
+ tasklet_kill(&priv->mrv_tx_cb_tasklet);
+ mrv_free_rx_ring(priv);
+ mrv_free_tx_ring(priv);
+}
+
+static int mrv_start(struct ieee80211_hw *dev)
+{
+ struct mrv_priv *priv = dev->priv;
+ /*printk(KERN_ERR"mrv_start\n");*/
+
+ priv->up = 1;
+ /*printk(KERN_ERR"mrv_start after up\n");*/
+ tasklet_enable(&priv->mrv_rx_tasklet);
+ tasklet_enable(&priv->mrv_tx_cb_tasklet);
+ /*printk(KERN_ERR"mrv_start after tasklet\n");*/
+ mrv_alloc_rxring(priv);
+ mrv_alloc_txring(priv);
+ /*printk(KERN_ERR"mrv_start after rings\n");*/
+
+ mrv_set_dma_rings(priv);
+ /*printk(KERN_ERR"mrv_start after hw\n");*/
+
+ /* Suspect that all commands must be sent AFTER set radio. Including the
+ * get_hw_spec. But radio should be already enabled by default. Just make
+ * sure we use AUTO preamble here
+ */
+
+ /*
+ if (mrv_set_prescan(priv)) {
+ printk(KERN_ERR"Failed to prescan\n");
+ return -1;
+ } else {
+ printk(KERN_ERR"Succeeded to prescan\n");
+ }*/
+
+ /*mrv_set_channel(priv, 5);*/
+ /*printk(KERN_ERR"mrv_start after channel\n");*/
+ mrv_set_antenna(priv, MRV_ANTENNA_RXA, 0xffff);
+ mrv_set_antenna(priv, MRV_ANTENNA_TXA, 0x2);
+ /*printk(KERN_ERR"mrv_start after antenna\n");*/
+
+ if (priv->AntNum == 2) {
+ mrv_set_antenna(priv, MRV_ANTENNA_RXB, 0xffff);
+ mrv_set_antenna(priv, MRV_ANTENNA_TXB, 0x2);
+ }
+ /*printk(KERN_ERR"mrv_start after antenna2\n");*/
+
+ mrv_set_radio(priv, 1, MRV_PREAMBLE_AUTO);
+ /*printk(KERN_ERR"mrv_start after radio\n");*/
+
+ mrv_set_txpower(priv, 10);
+
+ /*printk(KERN_ERR"~mrv_start\n");*/
+ return 0;
+}
+
+static void mrv_set_promisc(struct mrv_priv *priv, int enable)
+{
+ u32 reg;
+ printk(KERN_ERR"mrv_set_promisc %i\n", enable);
+
+ reg = mrv_reg_read32(priv, MRV_REG_RX_MODE);
+ if (enable)
+ reg |= 1;
+ else
+ reg &= ~1;
+ mrv_reg_write32(priv, MRV_REG_RX_MODE, reg);
+}
+
+
+static void mrv_configure_filter(struct ieee80211_hw *dev,
+ unsigned int changed_flags,
+ unsigned int *total_flags,
+ int mc_count, struct dev_mc_list *mclist)
+{
+ printk(KERN_ERR"mrv_configure_filter %x\n", changed_flags);
+ *total_flags &= FIF_BCN_PRBRESP_PROMISC;
+
+ if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) {
+ if (*total_flags & FIF_PROMISC_IN_BSS) {
+ mrv_set_promisc(dev->priv, 1);
+ } else {
+ mrv_set_promisc(dev->priv, 0);
+ }
+ }
+ printk(KERN_ERR"~mrv_configure_filter\n");
+}
+
+static int mrv_config_interface(struct ieee80211_hw *dev,
+ struct ieee80211_vif *vif,
+ struct ieee80211_if_conf *conf)
+{
+ struct mrv_priv *priv = dev->priv;
+ int err = 0;
+
+ /*printk(KERN_ERR"mrv_config_interf\n");*/
+ memcpy(priv->bssid, conf->bssid, ETH_ALEN);
+ mrv_set_bssid(priv, priv->bssid);
+ /*printk(KERN_ERR"~mrv_config_interf\n");*/
+
+ return err;
+}
+
+static int mrv_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
+{
+ struct mrv_priv *priv = dev->priv;
+ int err;
+
+ printk(KERN_ERR"mrv_config: center_freq %i\n", conf->channel->center_freq);
+
+ err = mrv_set_channel(priv, conf->channel);
+ if (err) {
+ printk(KERN_ERR"~Failed to set channel\n");
+ return -1;
+ } else {
+ printk(KERN_ERR"Succeeded setting channel\n");
+ }
+ /* TODO in monitor mode make sure it use IEEE80211G mode */
+ /*if (conf->phymode == MODE_IEEE80211G)
+ err = mrv_set_allowed_rates(priv, 1);
+ else
+ err = mrv_set_allowed_rates(priv, 0);
+
+ if (err) {
+ printk(KERN_ERR"~Failed to set rates\n");
+ return -1;
+ }
+ */
+ err = mrv_set_slot(priv, conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME);
+ if (err) {
+ printk(KERN_ERR"~Failed to set slot\n");
+ return -1;
+ }
+ /*we must set again bssid filter after changing ch ?*/
+ mrv_set_bssid(priv, priv->bssid);
+
+ /* we must set the promisc mode *after* changing ch */
+ /*mrv_set_promisc(priv,priv->mode == IEEE80211_IF_TYPE_MNTR);*/
+ mrv_set_promisc(priv, 1);
+
+ /*mrv_set_postscan(priv);*/
+
+ printk(KERN_ERR"~mrv_config\n");
+
+ return 0;
+}
+
+static int mrv_set_rts_threshold(struct ieee80211_hw *dev, u32 val)
+{
+ struct mrv_cmd_hdr *cmd;
+ struct mrv_cmd_set_rts_threshold *data;
+ struct mrv_priv *priv = dev->priv;
+
+ printk(KERN_ERR"set_rts\n");
+
+ cmd = mrv_cmd(priv, MRV_CMD_SET_RTS_THRESHOLD,
+ MRV_CMD_SET_RTS_THRESHOLD_SZ, 0, 1);
+
+ data = (struct mrv_cmd_set_rts_threshold *)MRV_CMD_PAYLOAD(cmd);
+
+ data->threshold = cpu_to_le32(val);
+
+ if (mrv_send_cmd_sync(priv)) {
+ printk(KERN_ERR"Could not set rts threshold\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static void mrv_remove_interface(struct ieee80211_hw *dev,
+ struct ieee80211_if_init_conf *conf)
+{
+ struct mrv_priv *priv = dev->priv;
+ printk(KERN_ERR"mrv_remove_interface\n");
+ priv->mode = IEEE80211_IF_TYPE_INVALID;
+ printk(KERN_ERR"~mrv_remove_interface\n");
+}
+
+static int mrv_add_interface(struct ieee80211_hw *dev,
+ struct ieee80211_if_init_conf *conf)
+{
+ struct mrv_priv *priv = dev->priv;
+ u8 bssid[] = {0, 0, 0, 0, 0, 0};
+
+ /*printk(KERN_ERR"mrv_add\n");*/
+ /* NOTE: using IEEE80211_IF_TYPE_MGMT to indicate no mode selected */
+ if (priv->mode != IEEE80211_IF_TYPE_INVALID /*IEEE80211_IF_TYPE_MGMT*/)
+ return -1;
+
+ memcpy(priv->bssid, bssid, ETH_ALEN);
+ priv->mode = conf->type;
+ mrv_set_mac_addr(priv, conf->mac_addr);
+
+ return 0;
+}
+
+static void mrv_set_d80211_stuff(struct mrv_priv *priv)
+{
+ /* printk(KERN_ERR"mrv_set_d80211_stuff\n");
+ memcpy(priv->channels, mrv_channels, sizeof(mrv_channels));
+ memcpy(priv->rates, mrv_rates, sizeof(mrv_rates));
+ priv->modes[0].mode = MODE_IEEE80211G;
+ priv->modes[0].num_rates = ARRAY_SIZE(mrv_rates);
+ priv->modes[0].rates = priv->rates;
+ priv->modes[0].num_channels = ARRAY_SIZE(mrv_channels);
+ priv->modes[0].channels = priv->channels;
+ priv->modes[1].mode = MODE_IEEE80211B;
+ priv->modes[1].num_rates = 4;
+ priv->modes[1].rates = priv->rates;
+ priv->modes[1].num_channels = ARRAY_SIZE(mrv_channels);
+ priv->modes[1].channels = priv->channels;*/
+ priv->dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING /*|
+ IEEE80211_HW_WEP_INCLUDE_IV |
+ IEEE80211_HW_DATA_NULLFUNC_ACK*/;
+ priv->dev->extra_tx_headroom = 8; /* 6 bytes addr4, 2 bytes FW len */
+ priv->dev->queues = 1;
+ priv->dev->max_rssi = 100; /* just to avoid dividing by zero */
+ /*priv->dev->channel_change_time = 300000;*/
+ priv->mode = IEEE80211_IF_TYPE_INVALID/*IEEE80211_IF_TYPE_MGMT*/;
+ /*priv->mode = IEEE80211_IF_TYPE_STA;
+ printk(KERN_ERR"~mrv_set_d80211_stuff\n");*/
+}
+
+static struct ieee80211_ops mrv_ops = {
+ .tx = mrv_tx,
+ .start = mrv_start,
+ .stop = mrv_stop,
+ .add_interface = mrv_add_interface,
+ .remove_interface = mrv_remove_interface,
+ .config = mrv_config,
+ .config_interface = mrv_config_interface,
+ .configure_filter = mrv_configure_filter,
+ .set_rts_threshold = mrv_set_rts_threshold,
+
+};
+
+const struct mrv_rate mrv_supported_rates[12] = {
+ { .bitrate = 10,
+ .hw_value = 0 | (1<<4),
+ /* .flags = IEEE80211_CCK_RATE_1MB_MASK*/
+ },
+ { .bitrate = 20,
+ .hw_value = 1 | (1<<4),
+ /* .flags = IEEE80211_CCK_RATE_2MB_MASK*/
+ },
+ { .bitrate = 55,
+ .hw_value = 2 | (1<<4),
+ /* .flags = IEEE80211_CCK_RATE_5MB_MASK*/
+ },
+ { .bitrate = 110,
+ .hw_value = 3 | (1<<4),
+ /* .flags = IEEE80211_CCK_RATE_11MB_MASK*/
+ },
+ { .bitrate = 60,
+ .hw_value = 4 | (1<<4),
+ /* .flags = IEEE80211_OFDM_RATE_6MB_MASK*/
+ },
+ { .bitrate = 90,
+ .hw_value = 5 | (1<<4),
+ /* .flags = IEEE80211_OFDM_RATE_9MB_MASK*/
+ },
+ { .bitrate = 120,
+ .hw_value = 6 | (1<<4),
+ /* .flags = IEEE80211_OFDM_RATE_12MB_MASK*/
+ },
+ { .bitrate = 180,
+ .hw_value = 7 | (1<<4),
+ /* .flags = IEEE80211_OFDM_RATE_18MB_MASK*/
+ },
+ { .bitrate = 240,
+ .hw_value = 8 | (1<<4),
+ /* .flags = IEEE80211_OFDM_RATE_24MB_MASK*/
+ },
+ { .bitrate = 360,
+ .hw_value = 9 | (1<<4),
+ /* .flags = IEEE80211_OFDM_RATE_36MB_MASK*/
+ },
+ { .bitrate = 480,
+ .hw_value = 10 | (1<<4),
+ /* .flags = IEEE80211_OFDM_RATE_48MB_MASK*/
+ },
+ { .bitrate = 540,
+ .hw_value = 11 | (1<<4),
+ /* .flags = IEEE80211_OFDM_RATE_54MB_MASK*/
+ },
+};
+
+static unsigned int
+mrv_copy_channels(struct mrv_hw *mh,
+ struct ieee80211_channel *channels,
+ unsigned int max)
+{
+ unsigned int i, count, freq, ch;
+ /*printk(KERN_ERR"mrv_copy_channels\n");*/
+
+ count = 0;
+ for (i = 0; i < 14; i++) {
+ ch = i + 1;
+ freq = ieee80211chan2mhz(ch);
+
+ /*printk(KERN_ERR"mrv_copy_channel %i\n", i);*/
+ /* Write channel info and increment counter */
+ channels[count].center_freq = freq;
+ channels[count].band = IEEE80211_BAND_2GHZ;
+ count++;
+ }
+ /*printk(KERN_ERR"~mrv_copy_channels\n");*/
+ return count;
+}
+
+static unsigned int
+mrv_copy_rates(struct ieee80211_rate *rates,
+ const struct mrv_rate *rt,
+ unsigned int max)
+{
+ unsigned int i, count;
+ /*printk(KERN_ERR"mrv_copy_rates\n");*/
+
+ if (rt == NULL) {
+ printk(KERN_ERR"~mrv_copy_rates (rt == NULL)\n");
+ return 0;
+ }
+ for (i = 0, count = 0; i < 12 && max > 0; i++) {
+ /*printk(KERN_ERR"mrv_copy_rate %i: %i\n", i,rt[i].bitrate);*/
+ rates[count].bitrate = rt[i].bitrate;
+ rates[count].hw_value = rt[i].hw_value;
+ /*rates[count].flags = rt->flags;*/
+ count++;
+ max--;
+ }
+
+ /*printk(KERN_ERR"~mrv_copy_rates\n");*/
+ return count;
+}
+
+void
+mrv_debug_dump_bands(struct mrv_priv *mp)
+{
+ unsigned int b, i;
+
+ BUG_ON(!mp->sbands);
+
+ for (b = 0; b < IEEE80211_NUM_BANDS; b++) {
+ struct ieee80211_supported_band *band = &mp->sbands[b];
+ char bname[5];
+ switch (band->band) {
+ case IEEE80211_BAND_2GHZ:
+ strcpy(bname, "2 GHz");
+ break;
+ case IEEE80211_BAND_5GHZ:
+ strcpy(bname, "5 GHz");
+ break;
+ default:
+ printk(KERN_DEBUG "Band not supported: %d\n",
+ band->band);
+ return;
+ }
+ printk(KERN_DEBUG "Band %s: channels %d, rates %d\n", bname,
+ band->n_channels, band->n_bitrates);
+ printk(KERN_DEBUG " channels:\n");
+ for (i = 0; i < band->n_channels; i++)
+ printk(KERN_DEBUG " ch %3d freq %d hwv %.4x fl %.4x\n",
+ ieee80211_frequency_to_channel(
+ band->channels[i].center_freq),
+ band->channels[i].center_freq,
+ band->channels[i].hw_value,
+ band->channels[i].flags);
+ printk(KERN_DEBUG " rates:\n");
+ for (i = 0; i < band->n_bitrates; i++)
+ printk(KERN_DEBUG " bitr %4d hw_val %.4x fl %.4x hw_val_short %.4x\n",
+ band->bitrates[i].bitrate,
+ band->bitrates[i].hw_value,
+ band->bitrates[i].flags,
+ band->bitrates[i].hw_value_short);
+ }
+}
+
+static int
+mrv_getchannels(struct ieee80211_hw *hw)
+{
+ struct mrv_priv *mrv_priv = hw->priv;
+ struct mrv_hw *mh = mrv_priv->mh;
+ struct ieee80211_supported_band *sbands = mrv_priv->sbands;
+ /*const struct mrv_rate_table *hw_rates;*/
+ unsigned int max_r, max_c, count_r, count_c;
+
+ struct ieee80211_supported_band *sbandg =
+ &sbands[IEEE80211_BAND_2GHZ];
+ /*struct ieee80211_supported_band *sbanda =
+ &sbands[IEEE80211_BAND_5GHZ];*/
+
+ BUILD_BUG_ON(ARRAY_SIZE(mrv_priv->sbands) < IEEE80211_NUM_BANDS);
+
+ /*printk(KERN_ERR"mrv_getchannels\n");*/
+
+ max_r = ARRAY_SIZE(mrv_priv->rates);
+ max_c = ARRAY_SIZE(mrv_priv->channels);
+ count_r = count_c = 0;
+
+ /* 2GHz band */
+
+ sbandg->bitrates = mrv_priv->rates;
+ sbandg->channels = mrv_priv->channels;
+
+ sbandg->band = IEEE80211_BAND_2GHZ;
+ sbandg->n_channels = mrv_copy_channels(mh, sbandg->channels,
+ max_c);
+
+ /*hw_rates = mrv_hw_get_rate_table(mh, mode2g);*/
+ sbandg->n_bitrates = mrv_copy_rates(sbandg->bitrates,
+ mrv_supported_rates, max_r);
+ /*printk(KERN_ERR"mrv_getchannels n_bitrates %i\n", sbandg->n_bitrates);*/
+
+ count_c = sbandg->n_channels;
+ count_r = sbandg->n_bitrates;
+
+ hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sbandg;
+
+ max_r -= count_r;
+ max_c -= count_c;
+
+ /* 5GHz band */
+ /*
+ sbanda->bitrates = &mrv_priv->rates[count_r];
+ sbanda->channels = &mrv_priv->channels[count_c];
+
+ sbanda->band = IEEE80211_BAND_5GHZ;
+ sbanda->n_channels = 0; //mrv_copy_channels(mh, sbanda->channels,
+ AR5K_MODE_11A, max_c);//
+
+ //hw_rates = mrv_hw_get_rate_table(mh, AR5K_MODE_11A);
+ sbanda->n_bitrates = 0; //ath5k_copy_rates(sbanda->bitrates,
+ hw_rates, max_r);//
+
+ hw->wiphy->bands[IEEE80211_BAND_5GHZ] = sbanda;
+ */
+ mrv_debug_dump_bands(mrv_priv);
+
+ /*printk(KERN_ERR"~mrv_getchannels\n");*/
+ return 0;
+}
+
+static int __devinit mrv_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct ieee80211_hw *dev = NULL;
+ struct mrv_priv *priv;
+ unsigned long bar1_start, bar1_len, bar1_flags;
+ unsigned long bar2_start, bar2_len, bar2_flags;
+ void *bar1_addr = NULL, *bar2_addr = NULL;
+ int err;
+
+ /printk(KERN_ERR"mrv_init_one\n");*/
+ err = pci_enable_device(pdev);
+
+ bar1_start = pci_resource_start(pdev, 0);
+ bar1_len = pci_resource_len(pdev, 0);
+ bar1_flags = pci_resource_flags(pdev, 0);
+
+ if (!(bar1_flags & IORESOURCE_MEM)) {
+ printk(KERN_ERR"bar1 resource type is not memory\n");
+ err = -ENODEV;
+ goto fail_disable_device;
+ }
+
+ bar2_start = pci_resource_start(pdev, 1);
+ bar2_len = pci_resource_len(pdev, 1);
+ bar2_flags = pci_resource_flags(pdev, 1);
+
+ if (!(bar2_flags & IORESOURCE_MEM)) {
+ printk(KERN_ERR"bar1 resource type is not memory\n");
+ err = -ENODEV;
+ goto fail_disable_device;
+ }
+
+ err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (err) {
+ printk(KERN_ERR"No usable DMA configuration.\n");
+ goto fail_disable_device;
+ }
+
+ bar1_addr = ioremap_nocache(bar1_start, bar1_len);
+ if (bar1_addr == NULL) {
+ printk(KERN_ERR"Error calling ioremap for bar1.\n");
+ err = -EIO;
+ goto fail_disable_device;
+ }
+
+ bar2_addr = ioremap_nocache(bar2_start, bar2_len);
+ if (bar2_addr == NULL) {
+ printk(KERN_ERR"Error calling ioremap for bar2.\n");
+ err = -EIO;
+ goto fail_iounmap;
+ }
+
+ err = pci_request_regions(pdev, DRV_NAME);
+ if (err) {
+ printk(KERN_ERR"Error calling pci_request_regions.\n");
+ goto fail_iounmap;
+ }
+ pci_set_master(pdev);
+ err = pci_set_mwi(pdev);
+
+
+ dev = ieee80211_alloc_hw(sizeof(*priv), &mrv_ops);
+ if (!dev) {
+ printk(KERN_ERR "%s : can't allocate d80211 \n", pci_name(pdev));
+ err = -ENOMEM;
+ goto fail_release_regions;
+ }
+
+ priv = dev->priv;
+ priv->pdev = pdev;
+ priv->dev = dev;
+
+ /*SET_MODULE_OWNER(dev);*/
+
+ SET_IEEE80211_DEV(dev, &pdev->dev);
+ pci_set_drvdata(pdev, dev);
+
+ priv->bar1 = bar1_addr;
+ priv->bar1_phys = bar1_start;
+ priv->bar2 = bar2_addr;
+ priv->bar2_phys = bar2_start;
+
+ sema_init(&priv->cmd_sem, 1);
+
+ tasklet_init(&priv->mrv_rx_tasklet,
+ (void(*)(unsigned long)) mrv_rx_tasklet,
+ (unsigned long)priv);
+
+ tasklet_init(&priv->mrv_tx_cb_tasklet,
+ (void(*)(unsigned long)) mrv_tx_cb_tasklet,
+ (unsigned long)priv);
+
+ tasklet_disable(&priv->mrv_rx_tasklet);
+ tasklet_disable(&priv->mrv_tx_cb_tasklet);
+
+ init_waitqueue_head(&priv->wait_command_queue);
+
+ spin_lock_init(&priv->irq_th_lock);
+ spin_lock_init(&priv->tx_lock);
+
+ priv->fw_load = 0;
+ priv->up = 0;
+
+ mrv_init_cmd(priv);
+
+ err = mrv_hw_start(priv);
+ if (err)
+ goto fail_deinit_hw;
+
+ mrv_read_config(priv);
+
+ mrv_set_d80211_stuff(priv);
+
+ err = mrv_getchannels(dev);
+ if (err) {
+ printk(KERN_ERR"%s can't register hwmodes\n", pci_name(pdev));
+ goto fail_stop_hw;
+ }
+ /*
+ err = ieee80211_register_hwmode(dev, &priv->modes[0]);
+ if (err) {
+ printk(KERN_ERR"%s can't register hwmode\n", pci_name(pdev));
+ goto fail_stop_hw;
+ }
+
+ err = ieee80211_register_hwmode(dev, &priv->modes[1]);
+ if (err) {
+ printk(KERN_ERR"%s can't register hwmode\n", pci_name(pdev));
+ goto fail_stop_hw;
+ }
+ */
+
+ /*printk(KERN_ERR"ieee80211_register_hw\n");*/
+ err = ieee80211_register_hw(dev);
+ if (err) {
+ printk(KERN_ERR"%s can't register HW\n", pci_name(pdev));
+ goto fail_stop_hw;
+ }
+
+ /*printk(KERN_ERR"~mrv_init_one\n");*/
+ return 0;
+fail_stop_hw:
+ mrv_hw_halt(priv);
+fail_deinit_hw:
+ mrv_deinit_cmd(priv);
+ pci_set_drvdata(pdev, NULL);
+ ieee80211_free_hw(dev);
+fail_release_regions:
+ pci_release_regions(pdev);
+fail_iounmap:
+ if (bar1_addr)
+ iounmap(bar1_addr);
+ if (bar2_addr)
+ iounmap(bar2_addr);
+fail_disable_device:
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+
+ return err;
+}
+
+static void __devexit mrv_remove_one(struct pci_dev *pdev)
+{
+ struct ieee80211_hw *dev = pci_get_drvdata(pdev);
+ struct mrv_priv *priv;
+
+ /*printk(KERN_ERR"mrv_remove\n");*/
+ if (dev) {
+ priv = dev->priv;
+ mrv_hw_halt(priv);
+
+ ieee80211_unregister_hw(dev);
+ mrv_deinit_cmd(priv);
+
+ if (priv->bar1)
+ iounmap(priv->bar1);
+ if (priv->bar2)
+ iounmap(priv->bar2);
+
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+
+ pci_set_drvdata(pdev, NULL);
+
+ ieee80211_free_hw(dev);
+ }
+}
+
+
+static struct pci_driver mrv_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = mrv_pci_tbl,
+ .probe = mrv_init_one,
+ .remove = __devexit_p(mrv_remove_one),
+};
+
+
+static int __init mrv_init_module(void)
+{
+ printk(KERN_INFO"%s\n", DRV_DES*****ION);
+ printk(KERN_INFO"%s\n", DRV_COPYRIGHT);
+
+ return pci_register_driver(&mrv_pci_driver);
+}
+
+
+static void __exit mrv_cleanup_module(void)
+{
+ pci_unregister_driver(&mrv_pci_driver);
+}
+
+module_init(mrv_init_module);
+module_exit(mrv_cleanup_module);
+
diff --git a/drivers/net/wireless/mrv8k/mrv8.h b/drivers/net/wireless/mrv8k/mrv8.h
new file mode 100644
index 0000000..fdeb1f3
--- /dev/null
+++ b/drivers/net/wireless/mrv8k/mrv8.h
@@ -0,0 +1,428 @@
+/*
+ d80211 Marvell Libertas PCI driver
+
+ Adoption for wireless-testing.
+ Copyright (c) 2008 Markus Becker <[email protected]>
+
+ Copyright (c) 2007 Andrea Merello <[email protected]>
+
+ Based on existent mrv8k driver
+ Copyright (c) 2005 Luc Saillard <[email protected]>
+
+ Based on BSD malo driver (no code has been copyed. Programming
+ methods, magic values, and card specific programming details
+ has been looked at)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING. If not, write to
+ the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+ Boston, MA 02110-1301, USA.
+
+*/
+
+#define DRV_COPYRIGHT "Andrea Merello <andreamrl *at* tiscali.it>\nMarkus Becker <mab *at*
comnets.uni-bremen.de>"
+#define DRV_DES*****ION "mac80211 Marvell Libertas PCI/PCMCIA driver"
+#define DRV_VERSION "0.1"
+#define DRV_NAME "libertaspci"
+#define FW_FIRMWARE_FILENAME "mrv8k-f.fw"
+#define FW_BOOT_FILENAME "mrv8k-b.fw"
+
+#define MRV_CMD_PKT_SIZE 512
+#define MRV_CMD_MAGIC 0xAA55AA55
+#define MRV_FW_SIGNATURE 0xf0f1f2f4
+
+/* it is intentional we add sizeof(mrv_cmd_hdr) to all commands, but we don't add the header len
+ * when we send the MRV_CMD_FW. Bootloader don't want the header len, while firmware seems to
+ * need it
+ */
+#define MRV_CMD_FW 0x001
+#define MRV_CMD_GET_CONFIG 0x003
+#define MRV_CMD_GET_CONFIG_SZ (sizeof(struct mrv_cmd_get_config)+sizeof(struct mrv_cmd_hdr))
+#define MRV_CMD_SET_RADIO 0x01c
+#define MRV_CMD_SET_RADIO_SZ (sizeof(struct mrv_cmd_set_radio)+sizeof(struct mrv_cmd_hdr))
+#define MRV_PREAMBLE_AUTO 5
+#define MRV_PREAMBLE_SHORT 1
+#define MRV_PREAMBLE_LONG 3
+#define MRV_CMD_SET_TXPOWER 0x01e
+#define MRV_CMD_SET_TXPOWER_SZ (sizeof(struct mrv_cmd_set_txpower)+sizeof(struct mrv_cmd_hdr))
+#define MRV_CMD_SET_ANTENNA 0x020
+#define MRV_CMD_SET_ANTENNA_SZ (sizeof(struct mrv_cmd_set_antenna)+sizeof(struct mrv_cmd_hdr))
+#define MRV_ANTENNA_RXA 1
+#define MRV_ANTENNA_TXA 2
+#define MRV_ANTENNA_RXB 4
+#define MRV_ANTENNA_TXB 8
+
+#define MRV_CMD_SET_PRESCAN 0x0107
+#define MRV_CMD_SET_PRESCAN_SZ sizeof(struct mrv_cmd_hdr)
+#define MRV_CMD_SET_POSTSCAN 0x0108
+#define MRV_CMD_SET_POSTSCAN_SZ sizeof(struct mrv_cmd_hdr)
+
+#define MRV_CMD_SET_CHANNEL 0x10a /*0x1d for usb*/
+#define MRV_CMD_SET_CHANNEL_SZ (sizeof(struct mrv_cmd_set_channel)+sizeof(struct mrv_cmd_hdr))
+#define MRV_CMD_SET_RATES 0x110 /*0x22 0x76 0x7f about rates USB*/
+#define MRV_CMD_SET_RATES_SZ (sizeof(struct mrv_cmd_set_rates)+sizeof(struct mrv_cmd_hdr))
+#define MRV_CMD_SET_RTS_THRESHOLD 0x113
+#define MRV_CMD_SET_RTS_THRESHOLD_SZ (sizeof(struct mrv_cmd_set_rts_threshold)+sizeof(struct
mrv_cmd_hdr))
+#define MRV_CMD_SET_SLOT 0x114
+#define MRV_CMD_SET_SLOT_SZ (sizeof(struct mrv_cmd_set_slot)+sizeof(struct mrv_cmd_hdr))
+#define MRV_CMD_SET_MAC_ADDR 0x202
+#define MRV_CMD_SET_MAC_ADDR_SZ (sizeof(struct mrv_cmd_set_mac_addr)+sizeof(struct mrv_cmd_hdr))
+
+#define MRV_CMD_PAYLOAD(x) (((u8 *)x) + sizeof(struct mrv_cmd_hdr))
+
+
+#define MRV_INTA_MASK 0x1f
+#define MRV_INTB_MASK 0x1f
+
+#define MRV_REG_CMD_PTR 0xc10
+#define MRV_REG_STATUS 0xc14
+#define MRV_REG_GEN_ARM_INT 0xc18
+#define MRV_REG_INTA_MASK 0xc34
+#define MRV_REG_INTB_MASK 0xc3c
+#define MRV_REG_ISR 0xc30
+#define MRV_REG_RX_MODE 0xa300
+#define MRV_REG_BSSID 0xa530
+#define MRV_MEM_CMD_BOOT 0xbef8
+#define MRV_HWMEM_CMD_BOOT (0xc0000000 | MRV_MEM_CMD_BOOT)
+
+#define PCI_DEVICE_ID_MARVELL_W8K (0x1FA6)
+#define WL3563 0
+#define WL138G 1
+#define W8335 2
+#define WLGENERIC 3
+
+#define MRV_RX_DESC_NUM 128
+#define MRV_RX_PAYLOAD_LEN (2342 +
+#define MRV_MAX_RX_INT 128
+
+#define MRV_TX_DESC_NUM 128
+
+struct mrv_rate {
+ unsigned short flags;
+ unsigned short bitrate; /* In 100kbit/s */
+ unsigned short hw_value;
+};
+
+struct mrv_hw {
+ unsigned int supported_bands;
+ unsigned int supported_rates;
+
+ unsigned int num_channels;
+
+ const u8 *tx_power_a;
+ const u8 *tx_power_bg;
+ u8 tx_power_default;
+};
+
+/*
+static const struct ieee80211_rate mrv_rates[] = {
+ { .bitrate = 10,
+ .hw_value = 0 | (1<<4),
+ .flags = IEEE80211_CCK_RATE_1MB_MASK },
+ { .bitrate = 20,
+ .hw_value = 1| (1<<4),
+ .flags = IEEE80211_CCK_RATE_2MB_MASK },
+ { .bitrate = 55,
+ .hw_value = 2| (1<<4),
+ .flags = IEEE80211_CCK_RATE_5MB_MASK },
+ { .bitrate = 110,
+ .hw_value = 3| (1<<4),
+ .flags = IEEE80211_CCK_RATE_11MB_MASK },
+ { .bitrate = 60,
+ .hw_value = 4| (1<<4),
+ .flags = IEEE80211_OFDM_RATE_6MB_MASK },
+ { .bitrate = 90,
+ .hw_value = 5| (1<<4),
+ .flags = IEEE80211_OFDM_RATE_9MB_MASK },
+ { .bitrate = 120,
+ .hw_value = 6| (1<<4),
+ .flags = IEEE80211_OFDM_RATE_12MB_MASK },
+ { .bitrate = 180,
+ .hw_value = 7| (1<<4),
+ .flags = IEEE80211_OFDM_RATE_18MB_MASK },
+ { .bitrate = 240,
+ .hw_value = 8| (1<<4),
+ .flags = IEEE80211_OFDM_RATE_24MB_MASK },
+ { .bitrate = 360,
+ .hw_value = 9| (1<<4),
+ .flags = IEEE80211_OFDM_RATE_36MB_MASK },
+ { .bitrate = 480,
+ .hw_value = 10| (1<<4),
+ .flags = IEEE80211_OFDM_RATE_48MB_MASK },
+ { .bitrate = 540,
+ .hw_value = 11| (1<<4),
+ .flags = IEEE80211_OFDM_RATE_54MB_MASK },
+};
+
+static const struct ieee80211_channel mrv_channels[] = {
+ { .chan = 1,
+ .freq = 2412},
+ { .chan = 2,
+ .freq = 2417},
+ { .chan = 3,
+ .freq = 2422},
+ { .chan = 4,
+ .freq = 2427},
+ { .chan = 5,
+ .freq = 2432},
+ { .chan = 6,
+ .freq = 2437},
+ { .chan = 7,
+ .freq = 2442},
+ { .chan = 8,
+ .freq = 2447},
+ { .chan = 9,
+ .freq = 2452},
+ { .chan = 10,
+ .freq = 2457},
+ { .chan = 11,
+ .freq = 2462},
+ { .chan = 12,
+ .freq = 2467},
+ { .chan = 13,
+ .freq = 2472},
+ { .chan = 14,
+ .freq = 2484}
+};
+*/
+
+struct mrv_rx_des*****or {
+ u8 drvowner;
+ u8 rssi;
+ u8 status; /* Need to be set to 1 */
+ u8 chan;
+ __le16 datalen;
+ u8 rsvd0;
+ u8 rate;
+ __le32 dma_data; /* Point to the dma buffer use to transfer the data */
+ __le32 dma_next; /* Point to the next dma buffer to transfer control data */
+ __le16 qos;
+ __le16 rsvd1;
+} __attribute__((packed));
+
+struct mrv_tx_des*****or {
+ __le16 status;
+ __le16 fwowner;
+ u8 rate;
+ u8 priority;
+ __le16 qos;
+ __le32 dma_addr;
+ __le16 len;
+ u8 dest_addr[6];
+ __le32 dma_next;
+ __le32 rsvd0;
+ __le32 rsvd1;
+} __attribute__((packed));
+
+struct mrv_priv {
+ struct pci_dev *pdev;
+ struct ieee80211_hw *dev;
+ void *bar1;
+ unsigned long bar1_phys;
+ void *bar2;
+ unsigned long bar2_phys;
+
+ u8 *cmd_virt;
+ dma_addr_t cmd_dma;
+ __le32 *magic_virt;
+ dma_addr_t magic_dma;
+
+ int cmd_status;
+ struct semaphore cmd_sem;
+
+ struct tasklet_struct mrv_rx_tasklet;
+ struct tasklet_struct mrv_tx_cb_tasklet;
+ spinlock_t irq_th_lock;
+ spinlock_t tx_lock;
+ wait_queue_head_t wait_command_queue;
+
+ int AntNum;
+ int FwVer;
+ int HwVer;
+ int TxRingNum;
+ int RegionCode;
+ int TxHwDma0;
+ int TxHwDma1;
+ int TxHwDma2;
+ int TxHwDma3;
+ int RxHwDmaR;
+ int RxHwDmaW;
+
+ struct sk_buff *rx_skb[MRV_RX_DESC_NUM];
+ struct mrv_rx_des*****or *rx_ring_virt[MRV_RX_DESC_NUM];
+ dma_addr_t rx_ring_dma[MRV_RX_DESC_NUM];
+ int rx_idx;
+
+ struct sk_buff *tx_skb[MRV_TX_DESC_NUM];
+ struct mrv_tx_des*****or *tx_ring_virt[MRV_TX_DESC_NUM];
+ dma_addr_t tx_ring_dma[MRV_TX_DESC_NUM];
+ int tx_w_idx;
+ int tx_r_idx;
+ int tx_pending;
+
+ u8 bssid[ETH_ALEN];
+ int mode;
+ int fw_load;
+ int up;
+
+ struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
+ struct mrv_hw *mh;
+ struct ieee80211_rate rates[12];
+ struct ieee80211_channel channels[14];
+};
+
+static inline unsigned int mrv_reg_read8(struct mrv_priv *priv,
+ unsigned int reg)
+{
+ return readb(priv->bar2 + reg);
+}
+static inline unsigned int mrv_reg_read16(struct mrv_priv *priv,
+ unsigned int reg)
+{
+ return readw(priv->bar2 + reg);
+}
+static inline unsigned int mrv_reg_read32(struct mrv_priv *priv,
+ unsigned int reg)
+{
+ return readl(priv->bar2 + reg);
+}
+
+static inline void mrv_reg_write8(struct mrv_priv *priv,
+ unsigned int reg,
+ __le32 value)
+{
+ writeb(value, (void *)(priv->bar2 + reg));
+}
+static inline void mrv_reg_write16(struct mrv_priv *priv,
+ unsigned int reg,
+ __le32 value)
+{
+ writew(value, (void *)(priv->bar2 + reg));
+}
+static inline void mrv_reg_write32(struct mrv_priv *priv,
+ unsigned int reg,
+ __le32 value)
+{
+ writel(value, (void *)(priv->bar2 + reg));
+}
+
+static inline unsigned int mrv_mem_read8(struct mrv_priv *priv,
+ unsigned int reg)
+{
+ return readb(priv->bar1 + reg);
+}
+static inline unsigned int mrv_mem_read16(struct mrv_priv *priv,
+ unsigned int reg)
+{
+ return readw(priv->bar1 + reg);
+}
+static inline unsigned int mrv_mem_read32(struct mrv_priv *priv,
+ unsigned int reg)
+{
+ return readl(priv->bar1 + reg);
+}
+
+static inline void mrv_mem_write8(struct mrv_priv *priv,
+ unsigned int reg,
+ __le32 value)
+{
+ writeb(value, (void *)(priv->bar1 + reg));
+}
+static inline void mrv_mem_write16(struct mrv_priv *priv,
+ unsigned int reg,
+ __le32 value)
+{
+ writew(value, (void *)(priv->bar1 + reg));
+}
+static inline void mrv_mem_write32(struct mrv_priv *priv,
+ unsigned int reg,
+ __le32 value)
+{
+ writel(value, (void *)(priv->bar1 + reg));
+}
+static inline void mrv_reg_mb(struct mrv_priv *priv)
+{
+ mb();
+ mrv_reg_read8(priv, 0);
+}
+
+struct mrv_cmd_hdr {
+ __le16 type;
+ __le16 len;
+ __le16 sq;
+ __le16 status;
+} __attribute__ ((packed));
+
+struct mrv_cmd_get_config {
+ __le16 HwVer;
+ __le16 TxRingNum;
+ __le16 MCastAdrNum;
+ u8 MacAdr[6];
+ __le16 RegionCode;
+ __le16 AntNum;
+ __le32 FwVer;
+ __le32 TxRing0;
+ __le32 RxRingW;
+ __le32 RxRingR;
+ __le32 Magic;
+ __le32 TxRing1;
+ __le32 TxRing2;
+ __le32 TxRing3;
+} __attribute__((packed));
+
+struct mrv_cmd_set_channel {
+ __le16 flag;
+ u8 ch;
+ /* __le16 rftype;
+ __le16 rsvd0;
+ u8 chlist[32];*/
+} __attribute__((packed));
+
+struct mrv_cmd_set_antenna {
+ __le16 rtx;
+ __le16 param;
+} __attribute__((packed));
+
+struct mrv_cmd_set_radio {
+ __le16 flag;
+ __le16 preamble;
+ __le16 enable;
+} __attribute__((packed));
+
+struct mrv_cmd_set_rates {
+ u8 fixedrate;
+ u8 fixedindex;
+ u8 rates[14];
+} __attribute__((packed));
+
+struct mrv_cmd_set_mac_addr {
+ u8 addr[6];
+} __attribute__((packed));
+
+struct mrv_cmd_set_txpower {
+ __le16 action;
+ __le16 txpower;
+ __le16 currentpowerlvl;
+ __le16 rsvd;
+ __le16 powers[8];
+} __attribute__((packed));
+
+struct mrv_cmd_set_rts_threshold{
+ __le32 threshold;
+} __attribute__((packed));
+
+
+struct mrv_cmd_set_slot {
+ __le16 action;
+ u8 shortslot;
+} __attribute__ ((packed));
--