Ich sammele hier die Fixes der Kartenhersteller und versuche auch immer die Anleitung dazu zu posten. Hier könnt ihr gerne Fragen stellen und darüber diskutieren.
DSTWO upgrade in THREE methods:
1. There is a *.dat file copy to MicroSD, DSTWO can auto detect it and run it. Now we use now.
If DSTWO be blocked.
2. DSTWO system is very special design, just replace a system file in MicroSD can jailbreak DSi.
If method 2 also don’t work
3. DSTWO has powerful built-in CPU. Even it has been totally blocked by DSi. Just insert the DSTWO into the DSi, the DSi provide the power to the slot 1, DSTWO CPU still can get power from it, than, DSTWO CPU can run a special upgrade file in MicroSD.
To use: download the .zip file and copy "system1.dat" to "root/_dstwo"folder and replace the same-name file.
1. All machines are upgradable: even your machine has already been in firmware 1.4.1. And no need to find another bootable machine to perform the upgrading process.
2. risk-free: flash card will not be damaged even the upgrading process is not successfully.
3. fast and easy to update
just plug in the "programming cable" and wait for about 30sec.
DSTTi
Möglichkeit 1 10.09.2010
[ Link nur für registrierte Mitglieder sichtbar. Bitte einloggen oder neu registrieren ] Könnte ein Fake sein! Anleitung
Instructions:
- Format your memory card and place the DSTT kernel provided above.
- Then place the DSTTi fix files in the root drive of your memory card.
- Plug the AC adapter on the outlet and plug it to your DS (charging indicator must be up.. since the battery tends to drain fast.)
- Place the memory card in your DSTTi and boot it up on your DS.
- Select the TTi update.
- On the first batch. It should check files (CRC check the files to be sure that the flashing will went well.)
*****Warning: Full charged battery and you plugged in the AC charger.
- Place it on your table for a while to avoid bricking your DSTTi.. since most of the cart tends to freeze when you moved them anyway.
- Then it will say that Press X+Y to begin...
- The update will erase the flash memory and its content (finished around 5mins)
- Then a programming will show up (10mins or more..)
*****My battery indicator flash a red color in this step.. but anyway.. its around 90% on that way.
- Then you will hear a fancy melody with a message that you successfully updated your DSTTi internal firmware.
- In this case.. you only have to do is to press any key to turn off. (dunno... but in my case.. it was just restarted @ DSi menu.. lol)
- Done.. you can now update your DSi.
--- ;D enjoy
--- btw: the CRC was changed this time... (bootcode of DSTTi... so that why it passes the check lol)
--- still using the old Star Wars Lethal Alliance.. as their bootcode
Please follow the steps below to update the card firmware.
1. extract ex4ds_141_fix.nds to your root folder of TF card
2. run ex4ds_141_fix.nds on your NDS, NDSL or NDSi which version should be below 1.4.1 or 1.4.2C
3. Wait for firmware verification then press L + Start to update your card.
4. Do NOT power off or restart your DS while updating.
R4iDS Gold www.r4ids.cn 14.09.2010
[ Link nur für registrierte Mitglieder sichtbar. Bitte einloggen oder neu registrieren ] Anleitung
About r4idsgold_Upgrade_NDSL_V141.nds
1.r4idsgold_Upgrade_NDSL_V141.nds is for NDSL.
2.You should get a NDS Lite.
3.Copy r4idsgold_Upgrade_NDSL_V141.nds to the TF card.
4.Start r4ids gold
5.Pull out your r4ids and reinsert it again.
6.Press Key A and the upgrading will begin.
7.If "upgrading succeeds" shows, it means your r4ids has been upgraded successfully.
8.If Card check fail,please reinsert the card and try once again.
9.Attentionuring the whole process,you should keep your NDSi powered on.
10.This program can be used to upgrade r4ids continually.You can insert another r4ids and upgrade it after one is finished.
About r4idsgold_Upgrade_NDSi_V141.nds
1.r4idsgold_Upgrade_NDSi_V141.nds is for NDSi.
2.You should get a NDSi whose software should be under V1.4.1.
3.Copy r4idsgold_Upgrade_NDSi_V141.nds to the TF card.
4.Start r4ids gold
5.Press Key A and the upgrading will begin.
6.If "upgrading succeeds" shows, it means your r4ids has been upgraded successfully.
7.Attentionuring the whole process,you should keep your NDSi powered on.
About EDGEi_Upgrade_NDSL_V141.nds
1.EDGEi_Upgrade_NDSL_V141.nds is for NDSL.
2.You should get a NDS Lite.
3.Copy r4idsgold_Upgrade_NDSL_V141.nds to the TF card.
4.Start r4ids gold
5.Pull out your EDGEi and reinsert it again.
6.Press Key A and the upgrading will begin.
7.If "upgrading succeeds" shows, it means your r4ids has been upgraded successfully.
8.If Card check fail,please reinsert the card and try once again.
9.Attentionuring the whole process,you should keep your NDSi powered on.
10.This program can be used to upgrade EDGEi continually.You can insert another EDGEi and upgrade it after one is finished.
About EDGEi_Upgrade_NDSi_V141.nds
1.EDGEi_Upgrade_NDSi_V141.nds is for NDSi.
2.You should get a NDSi whose software should be under V1.4.1.
3.Copy r4idsgold_Upgrade_NDSi_V141.nds to the TF card.
4.Start r4ids gold
5.Press Key A and the upgrading will begin.
6.If "upgrading succeeds" shows, it means your r4ids has been upgraded successfully.
7.Attentionuring the whole process,you should keep your NDSi powered on.
1. Obtain the required ROM file, which for this version of the updater is
"0583 - Shikakui Atama wo Maruku Suru DS Joushiki Nanmon no Shou".
Please see below for further details.
2. Insert a MicroSD card into a card reader, then insert the card reader into
your PC. The MicroSD must be formatted with FAT/FAT32.
3. Launch the bootstrap updater executable, EdgeBootUpdate.exe
4. In the bootstrap updater GUI, select the drive corresponding to your
MicroSD reader
5. Using the "..." button, navigate to the ROM file specified in step 1
6. Press the "Update" button to place the bootstrap update on your MicroSD card
7. Using the MicroSD card, update your iEDGE bootstrap according to instructions
found in the iEDGE reference manual
Required ROM file
-----------------
For this version of the bootstrap updater, the required ROM file is
"Shikakui Atama wo Maruku Suru DS Joushiki Nanmon no Shou":
Common filename: 0583 - Shikakui Atama wo Maruku Suru DS Joushiki Nanmon no Shou (J).nds
MD-5 Checksum: 93A1CA0F8B68A0CAB50286D3EB796ED0
SHA-1 Checksum: 5FA26323DE5194B102358535B9E2B227337CF2FC
[ Link nur für registrierte Mitglieder sichtbar. Bitte einloggen oder neu registrieren ]
Ich habe gestern nen Update auf meinem Dsi gemacht weil ich meine Point Punkte einlösen wollte und nun läuft jaaaaa meine M3i Zero karte nicht mehr. So ein mist hätte ich das gewust hätte ich das nicht gemacht,. Jetzt Ärgere ich mich hier Schwarz.
Nun meine frage
Wo finde ich den diese datei in meinem system ich habe da nur "System.l2u" gefunden muß ich die ersetzen?
Für alle, für die Zukunft: Finger weg vom DSi- Update, wenn Ihr Flashcarduser seid! Erst nach einem funktionierendem Fix umsehen, dann updaten. Oder besser noch sein lassen, wenn man den Shop nicht benötigt.
HI Ich komm irgendwie nicht klar mit der Micro hc (Modelnr.: MMB3R04GUACA-GE)
was kann ich nehmen Acekard 2i, SupercardDSTWO ,DSTTi ?
Hab leider keine Ahnung wie ich dann noch vorgehen muss.soll ich sowas machen wie downgraden oder wie geht das.sorry
Du musst die nehmen die zu deiner Flashkart passt das hat mit der MicroSD nichts zu tun. Wenn du nochmal eine Frage stellst und mir iene PN schreibst ist das ein Verwarngrund das ist unverschämt.
ähm ich hab ein update gemacht auf mein dsi dann wahr meine firmware 1.4.1e und jetzt geht meine acekard2i net und ich weiß jetzt net wie ich das wieder hinbekomm
bitte helfen
ok..das ist schonmal ein Anfang Danke
blos weiss ich net wie das funktioniert mit den spielen auf micro sd und was ich installieren muss.
und 2. hab ich blöderweise 1.4.1E drauf und nix geht mer. Beim Kumpel 1.4E geht alles.
Was sollte ich nun tun damit es wieder funzt?
Danke
achja....soll ich einfach die micro sd mit den spielen die im nds format sind in die flashkarte legen dann
die flashkarte in den dsi rein und es geht? oder muss ich noch andere sachen installieren ? und was ?
ohh sorry.natürlich...
funzt die firmware denn auch bei 1.4.1
Danke
Hab eben update 1.25 draufgemacht...geht nicht wenn ich die DSi einschalte kommt immer schwarzer Bildschirm mit dem Hinweis von Nintendo zu den Lizensbestimmungen :-(
Die Software müsste eigentlich 1.25b heissen. Kopiere einfach den Inhalt des downloads auf die Micro-SD Karte. Dann solltest dort folgendes haben:
- moonmemo
- moonshl2
- R4i Menu
- R4.dat
Ist das der Fall? Die Sachen müssen direkt auf die Karte kopiert werden und nicht der Ordner 1.25 oder 1.25b
Habs probiert..alles aus 1.25b in root von microhc gepackt.
geht nicht wieder schwarzer bildschirm mit nuzungsbedingungen von nintendo :-)...blödes update 1.1.4E
Wieso hast die doe karte geöffnet? Ich bezweifle das du sie so in den DSi steckst.
Vermutlich ist der Bootloader nicht änderbar, da wird sie auf dem DSi 1.4.1 nicht gehen. Kauf dir das nächste mal nicht son R4 Schrott
:-)
jo haste recht...kann ich denn mit ner anderen Flashkarte die1.4.1E umgehn?
Kauf ich mir halt ne neue.
Achja ich hab sie aus dem urlaub da wusste ich ja noch nicht was und wie das funzt ...aber langsam :-)
Welche flashkarte ist denn (wenns geht) die beste mit der man was anfangen kann ? )
oh hab nochml gelesen der hat ja sogar die geposteten getested
dann werd ich mal die Hyper R4i karte holen...moment hab gerade gelesen
wo ich dein TUT Supercard DSTWO angeklickt hab das es da auch ein update für 1.4.1E gibt..ist das richtig?
Die Hyper R4 geht wahrscheinlich nur deshalb weil nintendo sie in der masse der R4 Karten vergessen hat zu blocken. R4 ist schrott lies dir doch bitte dazu den Vergleichsthread durch.