[trix0matrix9]

Servus Leute,

Ich bin letzte Woche von Win 7 auf Ubuntu umgezogen. Jetzt habe ich noch 3 Fehler.

Problem 1,; Der Laptop fährt nicht ganz herunter. Habe schon die Datei /etc/default/grub wie folgt bearbeitet:

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi=force apm=power_off"

Beim herunterfahren sehe ich 5 FAILED vorbeiziehen, aber ich kann nicht lesen um was es geht, da die 1 Sec. nur auf dem Bildschirm erscheinen. Danach wird der Bildschirm schwarz, aber der Laptop bleibt an.

Problem 2.: Wenn ich versuche ein Spiel zu startetn mit OpenGL kommt immer die Fehlermeldung:

This system supports the OpenGL extension GL_EXT_framebuffer_object.
This system supports the OpenGL extension GL_EXT_framebuffer_blit.
This system supports the OpenGL extension GL_EXT_framebuffer_multisample.
This system DOES NOT support the OpenGL extension GL_APPLE_fence.
This system DOES NOT support the OpenGL extension GL_NV_fence.
This system supports the OpenGL extension GL_ARB_sync.
This system DOES NOT support the OpenGL extension GL_EXT_draw_buffers2.

Problem 3.: Ich versuche ein Programm jede Stunde zu starten. Es heißt Kanatest. Zuerst habe ich es mittels systemd, aber leider funktioniert es nicht.
Die .timer Datei

[Unit]
Des*****ion=Startet Kanatest jede Stunde

[Timer]
Unit=kanatest.service
OnBootSec= 1h
[Install]
WantedBy=basic.target

die .service Datei

[Unit]
Des*****ion=Startet Kanatest jede Stunde!

[Service]
Type=oneshot
ExecStart=/usr/bin/kanatest

Bitte helft mir ;( ich bin schon am verzweifeln

[ThreeChord]

Zu Punkt 3:

Wie wäre es das ganze als Cronjob starten zu lassen?

[trix0matrix9]

okay danke,

aber wie finde ich heraus, ob ich den cronjob richtig angelegt habe?

[Rumplestilskin]

cron-Jobs produzieren normalerweise ein log. Näheres z.B. hier: [ Link nur für registrierte Mitglieder sichtbar. Bitte einloggen oder neu registrieren ] oder jederzeit auf Google, da sich solche Dinge von Release zu Release bzw. Distribution zu Distribution ändern.

[n1x]

[Timer]
OnBootSec=10min
OnUnitActiveSec=1h
Unit=kanatest.service

[Service]
Type=simple # oneshot ist falsch
ExecStart=/usr/bin/kanatest

Mit

sudo journalctl -perr

kannst mal schauen was zu Fehlern führt.

[trix0matrix9]

okay danke, aber ich finde dort kein hinweis:

-- Logs begin at Di 2016-12-27 09:35:28 CET, end at Di 2016-12-27 10:04:25 CET. --
Dez 27 09:35:29 oliver-WIM-2040 systemd-modules-load[351]: Failed to find module 'apm power_off=1'
Dez 27 09:35:29 oliver-WIM-2040 systemd[1]: Failed to start Load Kernel Modules.
Dez 27 09:35:36 oliver-WIM-2040 kernel: BUG: unable to handle kernel paging request at c00fdd50
Dez 27 09:35:36 oliver-WIM-2040 kernel: IP: [<c00fdd50>] 0xc00fdd50
Dez 27 09:35:36 oliver-WIM-2040 kernel: CPU: 0 PID: 415 Comm: systemd-udevd Not tainted 4.8.0-32-generic #34-Ubuntu
Dez 27 09:35:36 oliver-WIM-2040 kernel: Hardware name: MEDIONPC WIM 2040/WIM 2040, BIOS R01-A0N 09/22/2005
Dez 27 09:35:36 oliver-WIM-2040 kernel: task: f636b780 task.stack: f5782000
Dez 27 09:35:36 oliver-WIM-2040 kernel: Stack:
Dez 27 09:35:36 oliver-WIM-2040 kernel: f8b52047 f5783c1c 00000000 0000012e 00009610 00000296 f5783c24 ffffffed
Dez 27 09:35:36 oliver-WIM-2040 kernel: f4a5a400 f8b54014 f5783c3c f8b524f7 00009610 0000012e 00000000 3471f88d
Dez 27 09:35:36 oliver-WIM-2040 kernel: ffffffed f4a5a40c f5783c58 cf538472 f5783c58 cf535902 f4a5a40c f8b54014
Dez 27 09:35:36 oliver-WIM-2040 kernel: Call Trace:
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<f8b52047>] ? call_bios+0x47/0x70 [wistron_btns]
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<f8b524f7>] ? wistron_probe+0x37/0x2a0 [wistron_btns]
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf538472>] ? platform_drv_probe+0x32/0x90
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf535902>] ? driver_sysfs_add+0x62/0x80
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf536329>] ? driver_probe_device+0x1f9/0x470
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf47674b>] ? acpi_driver_match_device+0x3b/0x55
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf536706>] ? __device_attach_driver+0x76/0x110
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf7fdf7b>] ? klist_next+0x1b/0xf0
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf536690>] ? __driver_attach+0xf0/0xf0
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf5342ef>] ? bus_for_each_drv+0x4f/0x90
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf535fc5>] ? __device_attach+0xc5/0x140
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf536690>] ? __driver_attach+0xf0/0xf0
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf5367e2>] ? device_initial_probe+0x12/0x20
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf5352e7>] ? bus_probe_device+0x77/0x80
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf533250>] ? device_add+0x380/0x5d0
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf1a1a95>] ? kfree_const+0x25/0x30
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf3de112>] ? kobject_set_name_vargs+0x62/0x80
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf538175>] ? platform_device_add+0x105/0x2a0
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf5389cf>] ? platform_device_alloc+0x5f/0x70
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<f8b712bf>] ? wb_module_init+0x24b/0xf8c [wistron_btns]
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<f8b71074>] ? dmi_matched+0x74/0x74 [wistron_btns]
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf002192>] ? do_one_initcall+0x42/0x180
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf1db410>] ? kfree+0x140/0x150
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf1dc185>] ? kmem_cache_alloc_trace+0x145/0x1a0
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf18087f>] ? do_init_module+0x21/0x1c3
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf18087f>] ? do_init_module+0x21/0x1c3
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf1808ae>] ? do_init_module+0x50/0x1c3
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf0ff6b2>] ? load_module+0x16c2/0x1c90
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf0ffea0>] ? SyS_finit_module+0xb0/0x100
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf0038ad>] ? do_fast_syscall_32+0x8d/0x140
Dez 27 09:35:36 oliver-WIM-2040 kernel: [<cf808cba>] ? sysenter_past_esp+0x47/0x75
Dez 27 09:35:36 oliver-WIM-2040 kernel: Code: 8b 1e 66 c1 eb 05 66 81 e3 f8 00 e8 9a fe ff ff 86 c4 66 5b 66 5a 5e c3 00 00 00 c3 c3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <55> 8b ec 83 c4 fc 66 89 45 fe 66 89 5d fc 81 e1 ff ff 00 00 e8
Dez 27 09:35:36 oliver-WIM-2040 kernel: EIP: [<c00fdd50>] 0xc00fdd50 SS:ESP 0068:f5783bf4
Dez 27 09:35:36 oliver-WIM-2040 systemd-udevd[381]: worker [415] failed while handling '/devices/virtual/dmi/id'
Dez 27 09:35:37 oliver-WIM-2040 systemd-modules-load[722]: Failed to find module 'apm power_off=1'
Dez 27 09:35:37 oliver-WIM-2040 systemd[1]: Failed to start Load Kernel Modules.
Dez 27 09:35:53 oliver-WIM-2040 bluetoothd[916]: Failed to obtain handles for "Service Changed" characteristic
Dez 27 09:35:53 oliver-WIM-2040 bluetoothd[916]: Sap driver initialization failed.
Dez 27 09:35:53 oliver-WIM-2040 bluetoothd[916]: sap-server: Operation not permitted (1)
Dez 27 09:35:53 oliver-WIM-2040 bluetoothd[916]: Failed to set mode: Blocked through rfkill (0x12)
Dez 27 09:36:05 oliver-WIM-2040 NetworkManager[1008]: nm_device_get_device_type: assertion 'NM_IS_DEVICE (self)' failed
Dez 27 09:36:08 oliver-WIM-2040 wpa_supplicant[1248]: ioctl[SIOCSIWENCODEEXT]: Invalid argument
Dez 27 09:36:08 oliver-WIM-2040 wpa_supplicant[1248]: ioctl[SIOCSIWENCODEEXT]: Invalid argument
Dez 27 09:36:08 oliver-WIM-2040 wpa_supplicant[1248]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none
Dez 27 09:36:08 oliver-WIM-2040 wpa_supplicant[1248]: dbus: Failed to construct signal
Dez 27 09:36:23 oliver-WIM-2040 lightdm[1365]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
Dez 27 09:36:23 oliver-WIM-2040 lightdm[1365]: PAM adding faulty module: pam_kwallet.so
Dez 27 09:36:23 oliver-WIM-2040 lightdm[1365]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file or directory
Dez 27 09:36:23 oliver-WIM-2040 lightdm[1365]: PAM adding faulty module: pam_kwallet5.so
Dez 27 09:36:34 oliver-WIM-2040 systemd[1368]: Failed to start Run Click user-level hooks.
Dez 27 09:36:45 oliver-WIM-2040 pulseaudio[1606]: [pulseaudio] backend-ofono.c: Failed to register as a handsfree audio agent with ofono: org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono was not provided by any .service files
Dez 27 09:36:46 oliver-WIM-2040 lightdm[1665]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory
Dez 27 09:36:46 oliver-WIM-2040 lightdm[1665]: PAM adding faulty module: pam_kwallet.so
Dez 27 09:36:46 oliver-WIM-2040 lightdm[1665]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file or directory
Dez 27 09:36:46 oliver-WIM-2040 lightdm[1665]: PAM adding faulty module: pam_kwallet5.so
Dez 27 09:36:57 oliver-WIM-2040 systemd[1688]: Failed to start Run Click user-level hooks.
Dez 27 09:37:09 oliver-WIM-2040 bluetoothd[916]: RFCOMM server failed for Headset Voice gateway: rfcomm_bind: Address already in use (9
Dez 27 09:37:09 oliver-WIM-2040 pulseaudio[2243]: [pulseaudio] backend-ofono.c: Failed to register as a handsfree audio agent with ofono: org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono was not provided by any .service files

also ich habe jetzt viel herumgespielt mit crontab und systemd, aber immer ohne erfolg ;(
systemd kanatest.service

[Unit]
Des*****ion=Kanatest

[Service]
Type=simple
ExecStart=/usr/bin/kanatest
User=oliver

[Install]
WantedBy=multiuser.target

systemd kanatest.timer

[Unit]
Des*****ion=Kanatest

[Timer]
Unit=kanatest.service
OnBootSec= 5min
OnUnitActiveSec= 1h
[Install]
WantedBy=multiuser.target

und bei crontab:

# Edit this file to introduce tasks to be run by cron.
#
# Each task to run has to be defined through a single line
# indicating with different fields when the task will be run
# and what command to run for the task
#
# To define the time you can provide concrete values for
# minute (m), hour (h), day of month (dom), month (mon),
# and day of week (dow) or use '*' in these fields (for 'any').#
# Notice that tasks will be started based on the cron's system
# daemon's notion of time and timezones.
#
# Output of the crontab jobs (including errors) is sent through
# email to the user the crontab file belongs to (unless redirected).
#
# For example, you can run a backup of all your user accounts
# at 5 a.m every week with:
# 0 5 * * 1 tar -zcf /var/backups/home.tgz /home/
#
# For more information see the manual pages of crontab(5) and cron(
#
# m h dom mon dow command
53 * * * * kanatest # so starte ich das Programm auch über die Konsole

und die fehlermeldungen
bei systemd:

● kanatest.service - Kanatest
Loaded: loaded (/etc/systemd/system/kanatest.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Di 2016-12-27 13:36:25 CET; 8min ago
Process: 8055 ExecStart=/usr/bin/kanatest (code=exited, status=1/FAILURE)
Main PID: 8055 (code=exited, status=1/FAILURE)

Dez 27 13:36:25 oliver-WIM-2040 systemd[1]: Started Kanatest.
Dez 27 13:36:25 oliver-WIM-2040 kanatest[8055]: cannot open display:
Dez 27 13:36:25 oliver-WIM-2040 systemd[1]: kanatest.service: Main process exited, code=exited, status=1/FAILURE
Dez 27 13:36:25 oliver-WIM-2040 systemd[1]: kanatest.service: Unit entered failed state.
Dez 27 13:36:25 oliver-WIM-2040 systemd[1]: kanatest.service: Failed with result 'exit-code'.

bei Cron:

Dec 27 12:53:01 oliver-WIM-2040 CRON[6846]: (oliver) CMD (kanatest )
Dec 27 12:53:01 oliver-WIM-2040 CRON[6845]: (CRON) info (No MTA installed, discarding output)

[n1x]

Der systemd timer tut schon - der kann kanatest nur nicht öffnen, da es sich wohl bei kanatest um ein Tool handelt das eine Grafische Oberfläche hat

Dez 27 13:36:25 oliver-WIM-2040 kanatest[8055]: cannot open display:

probiere das

ExecStart=export DISPLAY=:0 && /usr/bin/kanatest

[trix0matrix9]

Zitat von n1x

Dez 27 13:36:25 oliver-WIM-2040 kanatest[8055]: cannot open display:

probiere das

DANKE!! das funktioniert!!! zwar nicht mit systemd aber mit crontab! bleiben nur noch 2 probleme!

So wegen dem OpenGL habe ich auch noch zu kämpfen.
Also die Graka ist ATI Mobility Radeon X700 und soll OpenGL fähig sein.
daten über das momenta OpenGL auf meinem Laptop:

glxinfo |grep OpenGL
OpenGL vendor string: X.Org R300 Project
OpenGL renderer string: Gallium 0.4 on ATI RV410
OpenGL version string: 2.1 Mesa 13.1.0-devel
OpenGL shading language version string: 1.20
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 2.0 Mesa 13.1.0-devel
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 1.0.16
OpenGL ES profile extensions:

[n1x]

Versuche den proprietären ATI/AMD GraKa Treiber zu installieren. Da musste selbst schauen wie.